Avaya 3606 Hızlı Referans Kılavuzu

Telefon Avaya 3606 için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. Avaya 3606 1 sayfaları.
Ayrıca Avaya 3606 için: Kullanıcı Kılavuzu (16 sayfalar), Kullanıcı Kılavuzu (16 sayfalar)

Sayfayı Yazdır

Avaya™ 3606 Wireless IP Telephone Quick Reference Guide

Accessing the Function Menu

Press FCN followed by a digit (1-4, and * or #) while off-hook

to access the feature options programmed for your Wireless

Telephone template.

When you are on a call, your Wireless Telephone display will

show a solid number indicating which line you are currently

using. If a second call comes in on another line, a flashing

second number will appear to indicate which line is ringing.

The Line appearances administered for your extension are

displayed by pressing the LINE key when the Wireless

Telephone is off hook. If the > icon is on, additional

appearances can be displayed by repeatedly pressing the LINE

key. The line is selected by pressing the number key

corresponding to the number to the left of the "=" in the menu.

The line does not have to be on the current display to be

selected.

The Wireless Telephone has two volume levels, low and high.

You can set your low volume level by pressing FCN while

your Wireless Telephone is on-hook, and selecting a volume 1

through 8. While you are talking on the Wireless Telephone,

press VOL once to switch your volume level from low to high

and vice versa. The Wireless Telephone will reset to the low

volume when powered off.

See User Options at right for additional options that can be

configured at the end user level.

Press START, then FCN to access the Function Menu, which

lists the feature options programmed in your Wireless

Telephone.

Function Key

Strokes

FCN + 1

FCN + 2

FCN + 3

FCN + 4

FCN + 5

FCN + 6

FCN + 7

FCN + 8

FCN + 9

FCN + 0

For information on Battery Pack charging, see the

Avaya™ 3606 Wireless IP Telephone User Guide.

555-301-705, Issue 1

Part Number 72-0170-19, Revision B

February 2003

Fill In Your

Feature Settings

Mute

Last Number Dialed

Transfer

Conference

3606 Wireless IP Telephone

On/Off

Press and hold PWR. Two chirps on, one chirp off

Make a call

Press START to get dial tone.

Hang up

Press END. Be sure to do this at the end of each call.

Answer call

Press START. Line indicator comes on steady when

the call is answered.

Answer

Press HOLD to put your current call on hold, or END to

second call

hang up. Press LINE + the digit that is flashing.

Headset

Press any key (other than PWR or END) to answer a

answer

call when a headset is plugged in

Hold

Press HOLD

Take off Hold

Press LINE followed by the digit for the line on hold,

which will be flashing.

Function

Pressing FCN while off hook allows you to scroll

through menu screens.

User Options

Press FCN while on hook to change handset settings

(* shows current, follow display instructions to set):

Volume level—1 (softest) to 8 (loudest)

Ring Type (available types vary)

High Noise Mode—select:

Normal (for most office environments)

High (for moderate background noise)

Severe (for extremely noisy conditions)

Silence while

Press the END key to silence the ring.

ringing

Adjust Volume

Press VOL while in a call to toggle between base and

louder level

Status/Tone Indicators

NO SVC

An alarm sounds when the Wireless Telephone cannot

Alarm / Restore

receive or place calls. You may be outside of the

coverage area. Walk back into the covered area. A

restore tone indicates service is re-established.

BATT

Your Battery Pack charge is low. Your Battery Pack

Beep

needs to be recharged or replaced.

MSG

You have a voice mail message.