Avaya 3641 Kullanıcı Kılavuzu
Telefon Avaya 3641 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avaya 3641 2 sayfaları. Co-existence with ip wireless handset offering
Ayrıca Avaya 3641 için: Hızlı Referans Kılavuzu (2 sayfalar), Kurulum Kılavuzu (19 sayfalar), Yapılandırma Kılavuzu (8 sayfalar)
Sayfayı Yazdır
C T I I N S I G H T
Call Handling
Putting a call on hold: Press Hold softkey
Press [LINE] key followed by
Resume held call:
line number key
From Active in Call display;
Transfer a call:
1. Press Tran softkey or [FCN]
2. Then dial the user you wish to transfer to
3. Complete transfer by pressing Tran softkey
again or [FCN]
From Active in Call display;
Conference a call:
1. Press Conf softkey or [FCN]
2. Then dial the other user you wish to conference
3. Join all parties by pressing Join softkey
or [FCN]
Conference
Forwarding a call:
From Feature Menu display;
1. Press Fwd softkey or [FCN]
2. Enter the forwarding number for indicated line
3. Press [OK]
* It is recommended that you forward calls
from your desk phone or do not turn off your handset.
Calls will only be forwarded when portable phone is in
range and/or turned on.
Transfer
Transfer
Conference
Forward
3641 Wireless Handset User Guide
3641 Wireless Handset User Guide
Basic Handset Operations
Turn handset ON:
Turn handset OFF:
Unlock keypad:
Lock keypad:
Adjust volume:
Access Feature
Menu:
Answering and Making Calls
Making a call:
Calling a speed-dial: Press and hold the number speed dial en
Call from phonebook: Press Phbk softkey from "Standby
Calling a speed-dial: Press and hold the number speed dial
Answering a call:
Answering a 2nd line: If you are on a call and hear subdued
Answering with headset: Press [Start] to answer a call when a
w w w . c o n s o l t e c h . c o m
Press and hold END key until
two chirps sound
Press and hold END key until
one chirps sound
Press the Unlk softkey, then
[#]
Press the Cfg softkey, then
[OK]
Use volume buttons of side of
phone to adjust correspond
ing volume (ring tone, speak
er, handset or headset)
Press the feature softkey,
or [FCN]
Press [START], wait for dial tone then
dial number as you would your desk
phone
try was assigned
mode." Use to highlight name and
press Dial softkey
entry was assigned
To answer a call, press the [START] key
and hold the earpiece to your ear. You
may also activate the speakerphone func
tion or use a headset.
ringing, a call is coming in on a second
line. The line number on the display will
be flashing. To answer this call, put your
first call on hold and press [LINE] key,
then the line number of the second call.
headset is plugged in