Gardena 4000/5 Kullanım Talimatları Kılavuzu - Sayfa 5

Çim ve Bahçe Ekipmanları Gardena 4000/5 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gardena 4000/5 18 sayfaları. Garden pump
Ayrıca Gardena 4000/5 için: Kullanım Talimatları Kılavuzu (10 sayfalar), Kullanım Talimatları Kılavuzu (17 sayfalar), Kullanım Talimatları Kılavuzu (12 sayfalar), Operatör El Kitabı (14 sayfalar), Operatör El Kitabı (11 sayfalar), Operatör El Kitabı (10 sayfalar), Operatör El Kitabı (10 sayfalar), Kullanım Talimatları Kılavuzu (19 sayfalar), Kullanım Talimatları Kılavuzu (13 sayfalar), Kullanım Talimatları Kılavuzu (17 sayfalar)

Sayfayı Yazdır

Gardena 4000/5 Kullanım Talimatları Kılavuzu

Recommended Accessories

GARDENA Suction Unit

GARDENA Suction Hoses

GARDENA Suction Filter

with Backflow Preventer

GARDENA Bore

Hole Suction Hose

GARDENA Brass Quick

Thread Couplings

(➔ For use on delivery side)

Fixed Installation

Fixing Plate

Art. No. 1411 (3.5 m) / 1418 (7 m)

Vacuum-resistant spiral hose, ready for connection to suction filter

and backflow preventer ∅ 25 mm (1").

Kink- and vacuum-resistant, sold by the metre with 19 mm (3 /4")

or 25 mm (1") diameter without fittings or in fixed length, complete

with fittings.

Art. No. 1720 19 mm (3 /4") or Art. No. 1721 25 mm (1")

Art. No. 1726 19 mm (3 /4"); Art. No. 1727 25 mm (1");

Art. No. 1728 19 mm (3 /4") / 25 mm (1")

In metal / plastic.

Art. No. 1729 for use on inlet side

For vacuum-resistant connection of the pump to bore holes or

pipe works.

Length 0.5 m. With 33.3 mm (G 1) female thread at both ends.

Art. No.

1745

1729

Backflow Preventer

Art. No. 7109 Quick Thread Coupling with 33.3 mm (G1) thread

and

Art. No. 7120 Suction and High-Pressure Coupling for 19 mm

(3 /4") hoses or

Art. No. 7121 for 25 mm (1") hoses in conjunction with a hose

clamp Art. No. 7192.

To ensure the pump is stable and to prevent it from slipping, screw

the fixing plate supplied onto a suitable surface.

Stand both feet of your Pressure Tank Unit on the fixing plate.

Set up the pump such that a suitably large container can be

positioned below the drain screw for emptying the pump or unit.

If possible, install the pump higher than the surface of the water

to be pumped.

Note:

If this is not possible, install a vacuum-resistant shut-off device

between the pump and the suction hose, for example for cleaning

the integrated filter.