Gardena C 1060 profi/solar Kullanım Talimatları Kılavuzu - Sayfa 13
Çim ve Bahçe Ekipmanları Gardena C 1060 profi/solar için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gardena C 1060 profi/solar 18 sayfaları. Water computer
Sayfayı Yazdır
G
Fault
Possible Cause
No display appears
Rechargeable battery is flat.
Temperature on the display
is higher than 60 °C.
Programs cannot be
The current time and the day
entered
of the week were not entered
completely.
Manual opening via the
Manual watering period is set
0 0 : : 0 0 0 0
man. On / Off-key is not
to
possible
Tap turned off.
Watering program is not
Watering program has not
being undertaken
been entered completely.
Programs deactivated
(Prog. Off).
24
Remedy
v Place Water Computer
in the sun for 1 - 2 days
or charge the battery with
a charger for
NH 22 rechargeable
batteries.
Display appears after
temperature has dropped.
v Check function by operating
manually.
v Enter time and day of week
(see 5. Programming).
v Set manual watering period
.
to a figure greater than
0 0 : : 0 0 0 0
(see 5. Programming).
v Turn tap on.
v Read off watering program
and modify if necessary.
v Activate program
(Prog. On).
Fault
Watering program is not
being undertaken
9 V block /
If you have any other problems with your Water Computer, please contact GARDENA Service.
Possible Cause
Remedy
Program entry / modification
v Make program entry /
during or just before the
modification outside the
start pulse.
programmed start times.
Valve was opened manually
v Avoid possible program
previously.
overlaps.
Tap turned off.
v Turn on tap.
Program overlap
v Enter new watering
st
(1
watering start time has
program without overlaps.
priority).
Soil moisture or rain sensor
v If dry, check setting /
reports sufficient moisture.
location of soil moisture /
rain sensor.
Batt.-display flashes because
v Charge battery (see 4.
the battery does not have
Using the Water Computer
for the First Time "Insert
enough charge.
rechargeable battery" ).
G
25