Gardena C 1060 profi/solar Kullanım Talimatları Kılavuzu - Sayfa 5
Çim ve Bahçe Ekipmanları Gardena C 1060 profi/solar için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gardena C 1060 profi/solar 18 sayfaları. Water computer
Sayfayı Yazdır
G
4. Putting Your Water Computer into Operation
Insert battery :
A
1. Press unlock button
unit
2. Stick the programming help e.g. on the
bottom of the Water Computer.
3. Insert rechargeable battery supplied
(ACCU) into the battery compartment.
G
Ensure that the battery polarity
correct. The display shows all the LCD-
symbols for 2 seconds and then moves
to the time / day of week level.
4. Re-insert control unit
5. Place the Water Computer in the sun for 1 - 2 days before
programming it
– or –
charge it with a charger for 9 V block / NH22-batteries.
This Water Computer can only be operated with a rechargeable
battery.
I
z
P
8
Risk of damage to the Water Computer.
V Do not use alkali-manganese batteries. Charging
can cause them to leak out over the solar cells.
G
and pull control
H
out of the Water Computer housing.
I
is
P
H
in housing.
Connect Water Computer :
H
The Water Computer is fitted with a sleeve nut
G 1" (33.3 mm) thread. The adaptor supplied
Water Computer to be connected to taps with a G 3 /4" thread
J
(26.5 mm).
K
Connect Water Computer to water tap with G 1" (33.3 mm)
thread :
K
1. Screw sleeve nut
of the Water Computer on to the tap
thread by hand (do not use pliers).
L
2. Screw tap connector
Connect Water Computer to tap with G 3 /4" (26.5 mm) thread :
J
1. Screw adaptor
on to the tap manually (do not use pliers).
K
2. Screw sleeve nut
of the Water Computer on to the
thread by hand (do not use pliers).
L
L
3. Screw tap connector
G
K
for taps with
J
allows the
on to the Water Computer.
adaptor
on to the Water Computer.
9