Gardena Classic 3500/4 Kullanım Talimatları Kılavuzu - Sayfa 7

Çim ve Bahçe Ekipmanları Gardena Classic 3500/4 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gardena Classic 3500/4 15 sayfaları. Garden pump
Ayrıca Gardena Classic 3500/4 için: Operatör El Kitabı (10 sayfalar), Operatör El Kitabı (11 sayfalar), Kullanım Talimatları Kılavuzu (14 sayfalar), Kullanım Talimatları Kılavuzu (10 sayfalar), Kullanım Talimatları Kılavuzu (7 sayfalar), Operatör El Kitabı (9 sayfalar), Operatör El Kitabı (10 sayfalar)

Sayfayı Yazdır
Gardena Classic 3500/4 Kullanım Talimatları Kılavuzu
Problem
Pump runs, but the suction
action doesn't take place
Pump motor runs,
but delivery capacity
or pressure suddenly
decreases
Pump motor doesn't start
or suddenly stops
Noise development in the
hydraulic area
For any other malfunctions please contact the GARDENA service department.
Repairs must only be carried out by GARDENA service departments or specialist
dealers authorised by GARDENA.
16
Possible Cause
The waiting time wasn't
observed.
Suction filter or backflow
preventer in the suction hose
clogged.
Too high suction height.
In case of any other difficulties concerning the suction action,
use GARDENA Suction Hoses with Backflow Preventer
(see point "8. Available accessories") and fill in the liquid to
be pumped over the filler cap
Suction filter at the suction
hose is sucked free.
Suction filter or backflow
preventer clogged.
Leaks at suction side.
Impeller blocked.
No power.
Circuit breaker has switched off
the motor due to overheating /
overload.
Electric failure.
In the case of strong flows (e.g. open hose end, without
connect ing device), noise may result in the hydraulic part of
the pump. This is harmless and does not lead to damage
of the pump. The noise can be removed by lightly changing
the flow (e.g. light opening/closing of a connecting device).
Remedy
v Switch on the pump and
wait up to 5 min.
v Clean the filter or the back
flow preventer.
v Reduce suction height.
before operation.
7
v Reduce flow rate on the
delivery side with a control
valve, e.g. GARDENA
art. no. (2)977.
v Clean filter or back-flow
preventer.
v Eliminate leak.
v Release impeller.
v Check fuses and electric
connections.
v Ensure sufficient cooling /
ventilation and clean the
impeller chamber.
v Send the pump to one
of our GARDENA Service
Centres.