Lexmark MS510 Series Hızlı Referans - Sayfa 12

Yazıcı Lexmark MS510 Series için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Lexmark MS510 Series 17 sayfaları. Machine type 4514-630, 4514-635, 4514-636
Ayrıca Lexmark MS510 Series için: Teknik Not (3 sayfalar), Taşıma Kılavuzu (2 sayfalar), Manuel (20 sayfalar), Bağlantı Kılavuzu (6 sayfalar), Baskı Kılavuzu (5 sayfalar), Hızlı Referans (18 sayfalar), Kağıt El Kitabı (4 sayfalar), Bilgi Kılavuzu (1 sayfalar), Kurulum Sayfası (2 sayfalar), Özellikler (2 sayfalar), Servis Kılavuzu (18 sayfalar)

Sayfayı Yazdır
Lexmark MS510 Series Hızlı Referans
•
Load letterhead faceup with the top edge entering the printer
first. For two‑sided (duplex) printing, load letterhead facedown
with the bottom edge entering the printer first.
•
Load envelopes with the flap on the left side facedown.
Warning—Potential Damage: Never use envelopes with
stamps, clasps, snaps, windows, coated linings, or self‑stick
adhesives. These envelopes may severely damage the
printer.
5
From the printer control panel, set the paper size and paper type
in the Paper menu to match the paper or specialty media loaded
in the multipurpose feeder.

Clearing jams

[x]‑page jam, open front door. [20y.xx]
CAUTION—HOT SURFACE: The inside of the printer might be
hot. To reduce the risk of injury from a hot component, allow
the surface to cool before touching it.
1
Press the button on the right side of the printer, and then open the
front door.
2
2
Pull out the toner cartridge using the handle.
12
3
Lift the green handle, and then pull out the imaging unit from the
printer.
1
Warning—Potential Damage: Do not touch the shiny blue
photoconductor drum under the imaging unit. Doing so may
affect the quality of future print jobs.
4
Place the imaging unit aside on a flat, smooth surface.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.