Gardena RS 10 2150 Kullanım Talimatları Kılavuzu - Sayfa 3

Çim ve Bahçe Ekipmanları Gardena RS 10 2150 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gardena RS 10 2150 11 sayfaları. Grass shears; grass cutter

2. Charging unit:
accu-system V12
Battery Charger NL 12,
Art. No. 2105 (for Accu A 12 and
Accu-Pack AP 12)
accu-system V12
High-Speed Battery Charger
SL 60, Art. No. 2100
(only for Accu-Pack AP 12,
Art. No. 2110)
4. Proper use
The GARDENA Grass Shears and
Grass Cutter have been designed
for cutting grass edges and small
grass areas in private gardens.
These appliances are for private
use only and are not designed for
use in public places, parks, sports
arenas, street-scapes, in agriculture
or forestry.
It is absolutely necessary to ob-
serve the manufacturer's operating
instructions to ensure the unit's
proper functioning. These instruc-
tions also contain hints on service,
maintenance and repair.
Attention! For safety rea-
A
sons the Grass Shears /
Grass Cutter should not be
used for trimming hedges or
for chopping material for
composting.
5. Initial Operation (Fig. A- E)
5.1 How to click-in / remove
the Accu (Fig. B)
Snap the Accu (11) into the attach-
ment part (1). Make sure that the
Accu has been snapped in properly.
Listen for a "click" when doing this.
14
The Accu (11) can be released
from the unit by simultaneously
pressing in the two orange locking
buttons (4) on the handle (5) or
on the Accu-Pack if you are using
the AP 12.
Please read the operating instruc-
tions of Accu A 12 / Accu-Pack
AP 12.
5.2 Operation (Fig. A /A 1)
Grass Shears RS 10
Simultaneously press the on / off
switch (2) and the safety switch (3).
The safety switch (3) can be re-
leased having started the Grass
Shears. When releasing the on / off
switch (2), the Grass Shears will
switch off automatically.
Grass Shears RL 10 /
Grass Cutter RL 20
The unit is switched on by pressing
the on / off switch (2) at the handle
(5). When releasing the on / off
switch (2), the Grass Shears /
Grass Cutter will switch off auto-
matically.
The safety devices installed
A
on the unit by the manu-
facturer must not be removed or
by-passed, e. g. by binding the
on / off switch to the handle, as
there is risk of injury!
Do not operate the unit with an
external power source!
Caution! The blades take a while
to stop running after the unit has
been switched off.