Lexmark MS610de Hızlı Referans - Sayfa 15

Yazıcı Lexmark MS610de için çevrimiçi göz atın veya pdf Hızlı Referans indirin. Lexmark MS610de 18 sayfaları. Ms610 series monochrome laser printer
Ayrıca Lexmark MS610de için: Teknik Not (3 sayfalar), Manuel (20 sayfalar), Menü Haritası (4 sayfalar), Baskı Kılavuzu (4 sayfalar), Bilgi Kılavuzu (1 sayfalar), Kurulum Sayfası (2 sayfalar), Sarf Malzemeleri Kılavuzu (2 sayfalar), Özellikler (2 sayfalar), Hızlı Referans (17 sayfalar)

Sayfayı Yazdır
Lexmark MS610de Hızlı Referans
[x]‑page jam, open rear door. [20y.xx]
1
Open the front door.
2
2
Gently pull down the rear door.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
3
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
1
4
Close the rear door.
5
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Next >
> Clear the jam, press OK >
[x]‑page jam, clear standard bin. [20y.xx]
1
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
2
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Next >
> Clear the jam, press OK >
to clear the message
.
to clear the message
.
15
[x]‑page jam, remove tray 1 to clear
duplex. [23y.xx]
CAUTION—HOT SURFACE: The inside of the printer might be
hot. To reduce the risk of injury from a hot component, allow
the surface to cool before touching it.
1
Pull the tray completely out of the printer.