Avaya BCM50 Teknik Yapılandırma Kılavuzu - Sayfa 9
Telefon Avaya BCM50 için çevrimiçi göz atın veya pdf Teknik Yapılandırma Kılavuzu indirin. Avaya BCM50 18 sayfaları. Business communication manager for skype sip connect service
Ayrıca Avaya BCM50 için: Yapılandırma Kılavuzu (14 sayfalar)
Sayfayı Yazdır
2. Avaya Automatic QoS Configuration
2.1 ERS 4500 – Edge Switch
2.1.1 Avaya Automatic QoS CLI Configuration
Avaya Automatic QoS is configured by using the following command:
4526GTX-PWR(config)#qos agent nt-mode ?
disable
NT application traffic processing disabled on all ports
mixed
NT application traffic processing enabled on all ports with egress
DSCP remapping
pure
NT application traffic processing enabled on all ports without
egress DSCP remapping
where:
Parameter
disable
mixed
pure
Please note that phase 1 of Avaya Automatic QoS does not support ADAC, NSNA, or
802.1AB simultaneously.
Only Avaya Automatic QoS mixed mode is supported
2.1.2 Core Ports
The core or uplink port members should be configured as QoS trusted ports. This can be accomplished
by first adding a new QoS interface group and then adding the port members to this interface group.
4548GT_5-PWR(config)# qos if-group name <if-group_name> class trusted
4550T_5-PWR(config)# qos if-assign port <port members> name <if-group_name>
4548GT_5-PWR(config)# qos if-assign port <port members> name <if-group_name>
Ethernet Routing Switch 4500, 5000, Avaya BCM 50, 450, Avaya CS 1000, Avaya CS 2100, Avaya SRG 50
Description
Disables Avaya Automatic QoS functionality for the system
Enables Avaya Automatic QoS functionality with DSCP remarking at egress
enabled. Private Avaya DSCP values will be remarked to corresponding
standard DSCP values as noted in table 2.
Enables Avaya Automatic QoS functionality with DSCP remarking at egress
disabled. Private DSCP values will be honored as noted in table 1 while all
other traffic is remarked to QoS level of Standard. Please note that this mode is
not supported at this time.
avaya.com
8