Lexmark MS711 Manuel - Sayfa 4

Yazıcı Lexmark MS711 için çevrimiçi göz atın veya pdf Manuel indirin. Lexmark MS711 20 sayfaları. Printing guide
Ayrıca Lexmark MS711 için: Teknik Not (3 sayfalar), Bağlantı Kılavuzu (6 sayfalar), Kağıt El Kitabı (4 sayfalar), Taşıma Kılavuzu (3 sayfalar), Sarf Malzemeleri Kılavuzu (3 sayfalar), Menü Haritası (2 sayfalar), Bilgi Kılavuzu (1 sayfalar), Kurulum Sayfası (2 sayfalar), (Yunanca) (17 sayfalar)

Sayfayı Yazdır
Lexmark MS711 Manuel
Action
Step 1
a
Make sure your software program is using a correct fill pattern.
b
Resend the print job.
Do horizontal voids appear on prints?
Step 2
a
Load the specified tray or feeder with a recommended type of paper.
b
Resend the print job.
Do horizontal voids appear on prints?
Step 3
a
Redistribute the toner in the imaging unit.
1
Remove the toner cartridge, and then the imaging unit.
2
Firmly shake the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to direct
light for more than 10 minutes. Extended exposure to light may cause
print quality problems.
3
Reinstall the imaging unit, and then the cartridge.
b
Resend the print job.
Do horizontal voids appear on prints?
Step 4
Replace the imaging unit, and then resend the print job.
Do horizontal voids appear on prints?

Incorrect margins on prints

ABC
ABC
DEF
DEF
Action
Step 1
a
Move the width and length guides in the tray to the correct positions for the
paper size loaded.
b
Resend the print job.
Are the margins correct?
Print quality Guide
Page 4 of 19
Yes
No
Go to step 2.
The problem is solved.
Go to step 3.
The problem is solved.
Go to step 4.
The problem is solved.
Contact
customer
The problem is solved.
support.
Yes
No
The problem is solved.
Go to step 2.