Item
Worldwide
High Yield Toner Cartridge
Extra High Yield Toner Cartridge
1
This cartridge is supported only in the MS710 printer model.
2
This cartridge is supported only in the MS711 printer model.
Ordering an imaging unit
Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner.
For more information on replacing the imaging unit, see the instruction sheet that came with the supply.
Part name
Imaging unit
Ordering a maintenance kit
To identify the supported fuser type, view the label on the fuser. Do either of the following:
•
Remove the toner cartridge and imaging unit. The two-digit fuser type code (such as 11 or 13) can be seen on the front of
the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
•
Pull down the printer rear door. The two-digit fuser type code (such as 11 or 13) can be seen on the rear of the fuser.
Notes:
•
Using certain types of paper may require more frequent replacement of the maintenance kit.
•
The separator roller, fuser, pick rollers, and transfer roller are all included in the maintenance kit and can be individually
ordered and replaced if necessary.
•
For more information on replacing the parts included in the maintenance kit, see the instruction sheet that came with
each part.
Lexmark Return Program fuser maintenance kit type
Type
MS710 Series Return Program fuser maintenance kit type 11, 110–120V
MS710 Series Return Program fuser maintenance kit type 13, 220–240V
MS710 Series Return Program fuser maintenance kit type 15, 100V
Lexmark regular fuser maintenance kit type
Type
MS710 Series regular fuser maintenance kit type 17, 110–120V
MS710 Series regular fuser maintenance kit type 19, 220–240V
Lexmark Return Program
520Z
Supplies Guide
Page 2 of 3
Regular cartridge
1
520HA
2
520XA
Regular
520ZA
Part number
40X8530
40X8531
40X8532
Part number
40X8533
40X8534
Sayfayı Yazdır