Makita 6010SDW Kullanım Kılavuzu - Sayfa 3

Matkap Makita 6010SDW için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 6010SDW 14 sayfaları. 10 mm (3/8")

14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to

see

that keys and adjusting wrenches are removed from tool before turn-

ing it on.

15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger

on switch. Be sure switch is OFF when plugging in.

16. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only

extension cords intended for use outdoors and so marked.

17. STAY ALERT. Watch what you

are doing, use common sense. Don't oper-

ate tool when you are tired.

18. CHECK DAMAGED PARTS. Before further use of the

tool, a guard or other

part that is damaged should be carefully checked t o determine that

will

operate properly and perform its intended function. Check for alignment

of moving

parts,

binding of moving

parts,

breakage of parts, mounting, and

any other conditions that may affect its operation. A guard or other part

that is damaged should be properly repaired

replaced by an authorized

service center unless otherwise indicated elsewhere in this instruction manu-

al. Have defective switches replaced by authorized service center. Don't

use tool if switch does not turn it on and off.

19. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded

surfaces. For example; pipes, radiators, ranges, refrigerator enclosures.

20. REPLACEMENT PARTS. When servicing, use only identical replacement

parts.

VOLTAGE WARNING: Before connecting the tool to a power source (receptacle,

outlet, etc.) be sure the voltage supplied is the same a s that specified on the

nameplate of the tool. A power source with voltage greater than that specified

for the tool can result in SERIOUS INJURY t o the user

a s well

damage t o

the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with

voltage less than the nameplate rating is harmful t o the motor.