Avaya Definity Callmaster V Kullanıcı Kılavuzu - Sayfa 17

Telefon Avaya Definity Callmaster V için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avaya Definity Callmaster V 19 sayfaları. Avaya telephone console user's guide

Sayfayı Yazdır

9. Place the base of the telephone on the wall-jack mounting studs, and

pull downward until it is secure. (See Figure 6.)

FIGURE 6 Placing the Telephone on the Wall Jack Mounting Studs

10. Plug the quick-disconnect (QD) connector on the headset into the

QD connector on the headset cord already plugged into one of the

Headset jacks on the back of your telephone.

11. Turn on the headset OR press

tone. If there is no dial tone, check all wire connections to make sure

they are secure.

Installing the Designation Card

Use the button designation card, already installed on your CALLMASTER V

when it is shipped from the factory to write the telephone number, extension,

name, or feature that each call appearance/feature button can access. On the

left side of the phone is a Notepad on which you can write frequently-dialed

numbers or extensions.

To label and install the designation card and telephone Notepad

1. The transparent designation card and Notepad covers are attached to

the frame of the telephone by tabs on the top and bottom of the cover.

Remove either or both of these covers by pulling the top tab forward

and then lifting the bottom of the transparent cover from the telephone.

2. Print the numbers/features on the button designation card that

corresponds with the telephone you are using. On the Notepad write

frequently-called numbers or extensions or any other information that

will help you use your telephone in your daily work.

3. Place the button designation card and/or the Notepad under the plastic

card cover on the telephone by inserting the tabs at the bottom and

then pressing the top down until it clicks.

(or

Spkr

)

and listen for dial