Makita 6017D Kullanım Kılavuzu - Sayfa 2
Matkap Makita 6017D için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 6017D 13 sayfaları. Makita cordless driver drill instruction manual 6017d, 6018d, 6019d
Ayrıca Makita 6017D için: Kullanım Kılavuzu (17 sayfalar)
Sayfayı Yazdır
SPECIFICATIONS
Model
Capacities
-1
No load speed (min
)
Overall length
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the tool. Be
sure that you understand their meaning before use.
..................Only for EU countries
Do not dispose of electric equipment
together
material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life
must be collected separately and
returned
compatible recycling facility.
Intended use
The tool is intended for drilling and screw driving in
wood, metal and plastic.
2
Steel
Wood
Wood screw
Machine screw
High
Low
END001-1
with
household
waste
equipment
and
to
an
environmentally
6017D
5.1 mm x 35 mm
---
600
200
251 mm
1.0 kg
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is not more
than 70 dB (A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
These values have been obtained according to
EN60745.
its
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of stand-
ardized documents, EN60745, EN55014 in accordance
with Council Directives, 89/336/EEC, 98/37/EC.
Yasuhiko Kanzaki CE 2005
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
6018D
10 mm
15 mm
---
0 - 600
0 - 200
1.1 kg
D.C. 7.2 V
2
.
Director
6019D
6 mm
0 - 600
0 - 200
251 mm
1.1 kg