Lexmark MS810n Manuel - Sayfa 4

Yazıcı Lexmark MS810n için çevrimiçi göz atın veya pdf Manuel indirin. Lexmark MS810n 20 sayfaları. Ms810 series monochrome laser printer
Ayrıca Lexmark MS810n için: Bağlantı Kılavuzu (6 sayfalar), Bilgi Kılavuzu (1 sayfalar), Taşıma Kılavuzu (3 sayfalar), Kağıt El Kitabı (4 sayfalar), Menü Haritası (3 sayfalar), Kurulum Sayfası (2 sayfalar), Baskı Hataları Kılavuzu (1 sayfalar), Manuel (17 sayfalar), Baskı Kılavuzu (18 sayfalar), Mono Kalite El Kitabı (1 sayfalar), Ürün Özellikleri (2 sayfalar), Ürün Özellikleri (2 sayfalar)

Sayfayı Yazdır
Lexmark MS810n Manuel
Action
Step 1
a
Make sure your software program is using a correct fill pattern.
b
Resend the print job.
Do horizontal voids appear on prints?
Step 2
a
Load the specified tray or feeder with a recommended type of paper.
b
Resend the print job.
Do horizontal voids appear on prints?
Step 3
a
Redistribute the toner in the imaging unit.
1
Remove the toner cartridge, and then the imaging unit.
2
Firmly shake the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to direct
light for more than 10 minutes. Extended exposure to light may cause
print quality problems.
3
Reinstall the imaging unit, and then the cartridge.
b
Resend the print job.
Do horizontal voids appear on prints?
Step 4
Replace the imaging unit, and then resend the print job.
Do horizontal voids appear on prints?

Incorrect margins on prints

ABC
ABC
DEF
DEF
Action
Step 1
a
Move the width and length guides in the tray to the correct positions for the
paper size loaded.
b
Resend the print job.
Are the margins correct?
Print quality Guide
Page 4 of 19
Yes
No
Go to step 2.
The problem is solved.
Go to step 3.
The problem is solved.
Go to step 4.
The problem is solved.
Contact
customer
The problem is solved.
support.
Yes
No
The problem is solved.
Go to step 2.