Gardena 2315 Kullanım Talimatları Kılavuzu - Sayfa 5

Elektrikli Alet Gardena 2315 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gardena 2315 7 sayfaları.

Sayfayı Yazdır

Due to risk of personal

.Before re-using them in

injury and material

spring charge for approx.

damage, never clean the unit

20 hours.

with running water, especially

not under high pressure.

Disposal / Recycling

Your GARDENA Accu Shears

Store the grass shears in a

contain long-living nickel /cad-

dry and frostfree place. Keep

mium cells. After their lifetime

out of the reach of children.

have expired, they may not be

Cover the blade with sheath

disposed of as normal house

for storage.

rubbish, but must be disposed

of properly.

Correct wintering:

.Fully charge Accu Shears

Please return the NC-cells

after the last use (approx.

to a dealer who keeps the

20 hours).

GARDENA Accu Shears or

.Store in a cool, dry area

return them directly to one

where they are protected

on the rear page mentioned

from frost.

GARDENA Service Centres.

7. Trouble-Shooting

The unit does not cut well:

Repairs may only be performed

Check the blades and change

by GARDENA service centres

them if necessary as described

or by dealers authorised by

under point 5.

GARDENA.

With all other malfunctions,

We expressly point out that,

please contact one of the

in accordance with the prod-

GARDENA service centres

uct liability law, we are not li-

or a dealer authorised by

able for any damage caused

GARDENA.

by our units if it is due to

8. Information Concerning Proper Use, Safety Information

Caution – Danger !

Make sure that there are

Cutting tools have an

no other people (especially

after-run.

children) or animals anywhere

near the working area.

Before every use, inspect

the unit. Do not use the unit

You are responsible for the

if safety devices and / or the

safety of the working area.

blades have been damaged

Inspect the area to be cut be-

or are worn out. Never oper-

fore beginning. Remove any

ate the unit with the safety

objects from the area. Take

devices disassembled.

care of objects when working.

Only use the unit for the

If, in spite of that, you should

purposes specified in these

contact any obstructions

instructions.

when cutting, turn off the

unit, (safety stop switch

Do not wear loosely hanging

to position "0") and remove

clothes, jewelry etc. They

the object.

could become caught in the

machine. Wear sturdy shoes

If the cutting blades become

and gloves. Wear long

blocked, turn off the unit,

trousers to protect your legs.

(safety stop switch

tion "0") and remove the ob-

Changing the Accus (ill. F)

.Loosen screws

, remove

blades.

.Loosen casing screws

take-off casing.

.Pull cable receptacles

from accu-pack.

.Re-assemble in reverse

order.

Attention ! Contacts of

accus may not touch

metallic parts. Short circuit.

Fire risk !

improper repair or if parts ex-

changed are not original GAR-

DENA parts or parts

approved by us, and, if the

repairs were not carried

out by a GARDENA Service

Centre or an authorised

specialist. The same applies

to spare parts and acces-

sories.

ject ( thick branch, another

object) by means of a blunt

device.

Never use your fingers to

remove objects as blades

can cause enormous cutting

injuries.

The charging cable should

regularly be checked for signs

of damage and aging (brittle-

ness) and may only be used

if it is in perfect condition.

Only use the original

GARDENA charging device

or one authorised by the

manufacturer.

Non-rechargeable batteries

must not be charged with the

to posi-

battery charger (danger of

fire).

GARDENA Accu Standard

should not be operated

whilst charging process.

Only work when visibility is

good.

Be particularly careful when

walking backwards. You

might stumble !

EU Certificate of Conformity

The undersigned

GARDENA Kress + Kastner GmbH · Hans-Lorenser-Str. 40 · D-89079 Ulm

hereby certifies that, when leaving our factory, the unit indicated below is in accordance with the

harmonised EU guidelines, EU standards of safety and product specific standards.

This certificate becomes void if the unit is modified without our approval.

Description of the unit :

Accu Shears

Type :

Accu Standard

Art. No.:

2315

Description of the unit:

Charging Unit

Type:

NL 12

Art. No.:

2105

Never leave the unit unat-

ing area, it is absolutely

tended at the working area.

necessary to switch off the

unit (safety stop switch

If you should interrupt your

to position "0").

work, store the unit in a safe

place (safety stop switch

Never use the unit when it

to position "0").

is raining or in a damp, wet

area.

If you should interrupt your

work and go to another work-

EU directives:

Year of CE marking:

Machinery Directive 98 / 37/ EC

1993

Electromagnetic Compatibility

89 / 336 / EC

Ulm, 10.03.2000

Directive 93 / 68 / EC

Harmonised

European standards:

Thomas Heinl

EN 292 -1

Technical Dept. Manager

EN 292 - 2

EN 60335 -1 : 09 / 94