Makita 6093D Kullanım Kılavuzu - Sayfa 2
Matkap Makita 6093D için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 6093D 16 sayfaları. Equipped with electric brake 10 mm (3/8") with fast charger
Ayrıca Makita 6093D için: Kullanım Kılavuzu (17 sayfalar)
Sayfayı Yazdır
IMPORTANT
SAFETY INSTRUCTIONS
(For All Tools)
WARNING:
WHEN
USING
ELECTRIC
TOOLS,
BASIC SAFE-
TY
PRECAUTIONS
SHOULD
ALWAYS
BE FOLLOWED
TO
REDUCE
THE RISK OF FIRE, ELECTRIC
SHOCK,
AND
PER-
SONAL
INJURY,
INCLUDING
THE FOLLOWING:
READ ALL INSTRUCTIONS.
1. KEEP WORK
AREA CLEAN.
Cluttered
areas and benches
invite injuries.
2. CONSIDER
WORK
AREA ENVIRONMENT.
Don't use power tools in damp
or wet locations.
Keep work area well lit. Don't expose power tools to rain.
Don't use tool in presence
of flammable
liquids or gases.
3. KEEP CHILDREN
AWAY. All visitors
should be kept away from work area,
Don't
let visitors
contact
tool or extension
cord.
4. STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high
or locked-up
place -- out of reach of children.
5. DON'T
FORCE TOOL. It will do the job better and safer at the rate for which
it was intended.
6. USE RIGHT TOOL.
Don't force small tool or attachment
to do the job of a
heavy-duty
tool. Don't
use tool for purpose
not intended.
7. DRESS PROPERLY. Don't wear loose clothing or jewelry. They can be caught
in moving
parts. Rubber gloves and non-skid
footwear
are recommended
when working outdoors.
Wear protective
hair covering to contain long hair.
8. USE SAFETY
GLASSES.
Also use face or dust mask if cutting operation
is
dusty.
9. DON'T
ABUSE CORD. Never carry tool by cord or yank it to disconnect from
receptacle.
Keep cord from heat, oil, and sharp edges.
10. SECURE
WORK.
Use clamps
or a vise to hold work.
It's safer than using
your hand and it frees both hands to operate
tool.
11. DON'T
OVERREACH.
Keep proper footing
and balance
at all times.
12. MAINTAIN
TOOLS
WITH
CARE. Keep tools sharp and clean for better and
safer performance.
Follow instructions
for lubricating
and changing
acces-
sories. Inspect tool cords periodically and if damaged,
have repaired by autho-
rized service
facility.
Inspect
extension
cords periodically
and replace
if
damaged.
Keep handles
dry, clean, and free from oil and grease.
13. DISCONNECT
TOOLS. When not in use, before servicing,
and when chang-
ing accessories,
such as blades, bits, cutters.