Makita 6096D Kullanım Kılavuzu - Sayfa 5

Matkap Makita 6096D için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 6096D 13 sayfaları. Cordless high speed drill equipped with electric brake
Ayrıca Makita 6096D için: Kullanıcı Kılavuzu (5 sayfalar), Kullanım Kılavuzu (9 sayfalar), Kullanım Kılavuzu (17 sayfalar)

Sayfayı Yazdır

CAUTION:

• Pressing excessively on the tool will not speed up the

drilling. In fact, this excessive pressure will only serve

to damage the tip of your bit, decrease the tool perfor-

mance and shorten the service life of the tool.

• There is a tremendous force exerted on the tool/bit at

the time of hole breakthrough. Hold the tool firmly and

exert care when the bit begins to break through the

workpiece.

Drilling and driving performance

The following reference table indicates the approximate drilling and driving capacities from a single battery charge. It

may differ under some conditions.

Dimensions

Application

of hole

6.5 mm

Metal

10 mm

Wood

*15 mm

*18 mm

Application

Wood screws

(*...350 tr/mn)

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and the bat-

tery cartridge is removed before carrying out any work on

the tool.

To maintain product safety and reliability, repairs, mainte-

nance or adjustment should be carried out by a

Makita Authorized Service Center.

Workpiece

3 mm

Cold-rolled steel

sheet or plate

3 mm

Aluminun sheet

9 mm

Medium hard wood

Dimensions of

wood screw

3.5 mm x 20 mm

4.5 mm x 20 mm

*5.1 mm x 35 mm

*5.5 mm x 50 mm

• A stuck bit can be removed simply by setting the

reversing switch to reverse rotation in order to back out.

However, the tool may back out abruptly if you do not

hold it firmly.

• Always secure small workpieces in a vise or similar

hold-down device.

• If the tool is operated continuously until the battery car-

tridge has discharged, allow the tool to rest for 15 min-

utes before proceeding with a fresh battery.

Thickness

1.6 mm

25 mm

Workpiece

Medium hard wood

ACCESSORIES

CAUTION:

These accessories or attachments are recommended for

use with your Makita tool specified in this manual. The

use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory or

attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita service center.

• Phillips bit

• Slotted bit

• Soket bit

• Drill bit for steel

• Drill bit for wood

• Rubber pad assembly

• Foam polishing pad 125

• Wool bonnet 100

• Battery cover

• Various type of Makita genuine batteries and chargers

No. holes

Battery 9000

230

750

120

350

100

Fastenings

Battery 9000

Battery 9033

500 screws

400 screws

90 screws

60 screws

Battery 9033

380

1,250

200

590

160

100

850 screws

650 screws

150 screws

100 screws