Lexmark MS812 Series Manuel - Sayfa 17

Yazıcı Lexmark MS812 Series için çevrimiçi göz atın veya pdf Manuel indirin. Lexmark MS812 Series 20 sayfaları. Ms811/ms812 series monochrome laser printer
Ayrıca Lexmark MS812 Series için: Teknik Not (3 sayfalar), Bağlantı Kılavuzu (6 sayfalar), Baskı Kılavuzu (16 sayfalar), Kağıt El Kitabı (4 sayfalar), Menü Haritası (3 sayfalar), Taşıma Kılavuzu (3 sayfalar), Sarf Malzemeleri Kılavuzu (3 sayfalar), Kurulum Sayfası (2 sayfalar), Veri Sayfası (2 sayfalar)

Sayfayı Yazdır
Lexmark MS812 Series Manuel
Action
Step 4
a
Enable Quiet mode.
From the printer control panel, navigate to:
Settings > General Settings > Quiet Mode > On
b
Resend the print job.
Does the toner rub off?

Toner specks appear on prints

Action
Replace the imaging unit, and then resend the print job.
Do toner specks appear on prints?

Transparency print quality is poor

Action
Step 1
From the printer control panel, set the paper type in the Paper menu to match
the paper loaded in the tray.
Is the paper type for the tray set to Transparency?
Step 2
a
Check if you are using a recommended type of transparency.
b
Resend the print job.
Is the print quality still poor?

Uneven print density

Print quality Guide
Page 17 of 19
Yes
No
Contact
customer
The problem is solved.
support.
Yes
No
Contact
customer
The problem is solved.
support.
Yes
No
Go to step 2.
Set the paper type to
Transparency.
Contact
customer
The problem is solved.
support.