Gardena 9852-33 Çalıştırma Talimatları Kılavuzu - Sayfa 4
Elektrikli Alet Gardena 9852-33 için çevrimiçi göz atın veya pdf Çalıştırma Talimatları Kılavuzu indirin. Gardena 9852-33 11 sayfaları. Grass shear/shrub shear
Ayrıca Gardena 9852-33 için: Operatör El Kitabı (16 sayfalar), Operatör El Kitabı (15 sayfalar), Operatör El Kitabı (15 sayfalar), Operatör El Kitabı (16 sayfalar), Operatör El Kitabı (14 sayfalar)
Sayfayı Yazdır
b) Wear eye protection and stout shoes at all times while
operating the machine.
c) Avoid using the machine in bad weather conditions
especially when there is a risk of lightning.
d) Use the machine only in daylight or good artificial light.
e) Never operate the machine with damaged guards or
shields or without guards or shields in place.
f) Switch on the motor only when the hands and feet are
away from the cutting means.
g) Always disconnect the machine from the power supply
(i. e. remove the plug from the mains remove the
disabling device or removable battery)
– whenever the machine is left unattended,
– before clearing a blockage,
– before checking, cleaning or working on the machi-
ne,
– after striking a foreign object,
– whenever the machine starts vibrating abnormally.
h) Take care against injury to feet and hands from the
cutting means.
i) Always ensure that the ventilation openings are kept
clear of debris.
4) Maintenance and storage
a) Disconnect the machine from the power supply (i.e.
remove the plug from the mains remove the disabling
device or removable battery) before carrying out main-
tenance or cleaning work.
b) Use only the manufacturer's recommended replace-
ment parts and accessories.
c) Inspect and maintain the machine regularly. Have the
machine repaired only by an authorized repairer.
d) When not in use, store the machine out
of the reach of children.
General safety warnings for the Shrub Shear:
WARNING! Read all safety warnings and all
instructions.
Failure to follow the warnings and instructions may result
in electric shock, fire and / or serious injury.
Save all warnings and instructions for future refe-
rence. The term "power tool" in the warnings refers to
your mains operated (corded) power tool or battery ope-
rated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adap-
tor plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol
or medication. A moment of inattention while opera-
ting power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing pro-
tection used for appropriate conditions will reduce per-
sonal injuries.
c) Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and / or battery pack, picking up or carry-
ing the tool. Carrying power tools with your finger
on the switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tools may
result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust coll-
ection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power tool will do the job better and safer
at the rate for which it was designed.
5