Makita 6228DW Kullanım Kılavuzu - Sayfa 3
Matkap Makita 6228DW için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 6228DW 19 sayfaları. 9.6 v
i2 v
14.4 v
Ayrıca Makita 6228DW için: Kullanım Kılavuzu (19 sayfalar), Kullanım Kılavuzu (19 sayfalar), Kullanım Kılavuzu (19 sayfalar)
Sayfayı Yazdır
GENERAL SAFETY RULES
(For All Battery Operated Tools)
WARNING!
Read
and understand
all instructions.
Failure
to follow all instructions listed below, may result in electric
shock, fire and/or serious personal injury,
SAVE THESE INSTRUCTIONS
Work
Area
1. Keep your work area clean end well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence
of flammable
liquids, gases, or dust. Power tools create sparks which may
ignite the dust or fumes.
3. Keep bystanders,
children, and visitors away while operating
a power tool.
Distractions
can cause you to lose control.
Electrical Safety
4. A battery operated tool with integral batteries or a separate battery pack
must be recharged only with the specified charger for the battery. A charger
that may be suitable for one type of battery may create a risk of fire when
used with another battery.
5. Usa battery operated tool only with specifically designated battery pack,
Use of any other batteries may create a risk of fire_
Personal
Safety
6. Stay alert, watch what you are doing, and use common sense when operating
a power tool. Do not use tool while tlrsd or under the influence
of drugs,
alcohol, or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
7. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry,
or long hair can be caught in moving parts.
8. Avoid accidental starting. Be sure switch is in the locked or off position before
inserting
battery
pack.
Carrying tools with your finger on the switch or
inserting the battery pack into a tool with the switch,on
invites accidents.
9. Remove adjusting
keys or wrenches
before turning the tool on. A wrench
or a key that is left attached to a rotating part of the tool may result in personal
injury.
10. Do not overreach, Keep proper footing and balance at all times. Proper footing
and balance enable better control of the tool in unexpected
situations.
11. Use safety equipment.
Always
wear eye protection.
Dust mask, non-skid
safety shoes, hard hat, or hearing protection
must be used for appropriate
conditions.