Broadcom 9400-16e Başlangıç Kılavuzu - Sayfa 2

PCI Kart Broadcom 9400-16e için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Broadcom 9400-16e 2 sayfaları. Pcie storage adapter

Broadcom 9400-16e Başlangıç Kılavuzu
Handling Instructions
The handling and usage instructions stated herein are general guidelines for board-level products.
Individual board-level products may have additional instructions and requirements in the applicable
product specification, which should be consulted.
• Complete all handling at an electrostatic discharge (ESD)-safe workstation with ESD-safe tools. The
workstation and tools must comply with IPC-A-610 at a minimum or ANSI/ESD S20.20.
• Handle by the edges of the base board. Do not handle the board by the bracket, heat sinks, or any
installed daughter board or DIMM memory.
• Do not stack boards after removing them from their shipping containers. Place boards on a flat, ESD-
safe surface with the top side of the board up to prevent damage to the heat sink.
• Do not bend or twist the board at any time. Any stress that exceeds 500 micro-strain, or 500 micro-
inches of deflection per inch of board material in any direction, could damage the board. Broadcom
follows the IPC/JEDEC-9704 industry standard.
• When installing the board in a system, press down evenly on the top corners of the base board to
avoid contact with brackets, heat sinks, or any installed daughter board or DIMM memory.
• When installing cables, align the cable with the board-mounted connector. Do not force the cable
into the connector, and orient any polarized cables properly.
• Refer to the board Quick Installation Guide for complete instructions on changing the bracket,
including screw torque specifications.
• Disconnect the power before removing or replacing the board.
• Do not allow any fluid or any material that is conductive or corrosive to contact the board.
• The boards are designed to operate in an ambient environment of 10 °C to 55 °C (dry bulb). The
relative humidity environment should be between 20% and 80% (non-condensing).
• To avoid overheating, make sure the minimum required airflow is applied. Refer to the board Quick
Installation Guide for more information.
For product information and a complete list of distributors, please go to our website: www.broadcom.com.
Broadcom, the pulse logo, Connecting everything, Avago Technologies, and the A logo are the trademarks of Broadcom in
the United States, certain other countries and/or the EU.
Copyright © 2017 Broadcom. All Rights Reserved. pub-005789.
The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries. For more information, please visit
www.broadcom.com. Broadcom reserves the right to make changes without further notice to any products or data herein
to improve reliability, function, or design.
Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume any
liability arising out of the application or use of this information, nor the application or use of any product or circuit described
herein, neither does it convey any license under its patent rights nor the rights of others.
5972-4867-P0
January 20, 2017.
TECHNICAL SUPPORT
For assistance installing, configuring, or running
the adapter, contact Broadcom Technical
Support:
Website:
www.broadcom.com
WARRANTY NOTICE
The warranty does not cover the return of
1.
parts damaged by changing the bracket.
2.
The warranty does not cover ESD damage to
the adapter. Adapters returned without a bracket
mounted on the board will be returned without
return merchandise authorization (RMA)
processing.