Broadcom AirForce 54g Intensi-fi BCM94313HMG2L Kullanıcı Kılavuzu - Sayfa 16

PCI Kart Broadcom AirForce 54g Intensi-fi BCM94313HMG2L için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Broadcom AirForce 54g Intensi-fi BCM94313HMG2L 20 sayfaları. Pci-e mini card

Broadcom AirForce 54g Intensi-fi BCM94313HMG2L Kullanıcı Kılavuzu
Regulatory Statement for BCM94313HMG2L
If the module is installed in portable hosts, where the separation distance between
radiating elements and the user is less than 20cm, additional equipment authorization
procedure to address RF exposure compliance shall apply. If the module is installed with
other transmitting devices which can transmit simultaneously with this device and
antenna-to-antenna distance is less 20cm, assessing RF exposure compliance with
multiple transmitters within a host device shall be performed based upon FCC
requirements.
System integrators must include the FCC ID on the end product.
2. Canada - Industry Canada (IC)
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of this device."
L ' utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne
doit pas produire de brouillage et (2) l' utilisateur du dispositif doit étre prêt à accepter
tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that
required for successful communication.
Caution: (this only applicable to UNII device)
This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz
frequency range. Industry Canada requires this product to be used indoors for frequency
range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel
Mobile Satellite systems.
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to
5.85 GHz bands. These radar stations can cause interference with and/or damage this
device.
Caution: Exposure to Radio Frequency Radiation.
To comply with RSS 102 RF exposure compliance requirements, for mobile
configurations, a separation distance of at least 20 cm must be maintained between the
antenna of this device and all persons. This device must not be co-located or operating in
conjunction with any other antenna or transmitter.
System integrators must include the IC ID on the end product.
3. Europe - EU Restrictions
0984
This equipment needs to be marked with the
symbol and can be used
throughout the European community.
Page 2 of 6