Gardena AccuJet Li-18 Kullanım Talimatları Kılavuzu - Sayfa 9
Üfleyici Gardena AccuJet Li-18 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gardena AccuJet Li-18 16 sayfaları. Accu blower
Ayrıca Gardena AccuJet Li-18 için: Kullanım Talimatları Kılavuzu (16 sayfalar), Operatör El Kitabı (10 sayfalar), Kullanım Talimatları Kılavuzu (18 sayfalar), Kullanım Talimatları Kılavuzu (17 sayfalar), Kullanım Talimatları Kılavuzu (17 sayfalar)
Overwintering:
Disposal:
(in accordance with
RL 2012/19/EU)
Disposal of
batteries:
7. Maintenance
Before each use:
After each use:
22
Prepare unit for storage at the end of the season or if it will not
be used for 30 days or more.
If your blower is to be stored for a period of time:
1. Stop unit and remove battery (see 4. Initial Operation).
2. Charge battery; this will increase the life of the battery.
3. Clean the entire unit before lengthy storage.
4. Use a soft brush to clean air vents and air inlet of debris.
Do not use water.
5. Store your unit in a well ventilated area and covered,
if possible, to prevent dust and dirt accumulation.
Do not cover with plastic. Plastic cannot breathe and
may cause condensation and eventual rust or corrosion.
6. Check entire unit for loose screws.
Replace any damaged, worn, or broken parts.
7. Remove blower tube for easier storage.
The product must not be added to normal household waste.
It must be disposed of in line with local environmental regulations.
v Important: Make sure that the unit is disposed of via your
municipal recycling collection centre.
The GARDENA battery contains lithium-ion cells that should not
be discarded with normal household waste at the end of their life.
Important:
Li-ion
Please return the lithium-ion batteries to your GARDENA dealer
or dispose of them properly at a public recycling centre.
1. Discharge lithium-ion batteries completely.
2. Dispose of lithium-ion batteries properly.
DANGER!
Physical injury if the blower switches on unintentionally.
v B efore maintenance, remove the battery
(see 4. Initial Operation)
Keep all nuts, bolts and screws tight to be sure the product is
in a safe working condition.
1. Be sure all parts are assembled properly.
2. Check to see whether fastening elements and components
(e. g. blower tube) have become loose, damaged or worn.
3. Contact your authorized service dealer for replacement of
damaged or worn parts.
4. ON/OFF Switch – Ensure switch functions properly by moving
the switch to the OFF position. Make sure motor stops;
then restart motor and continue.
1. Inspect and clean unit and labels.
2. After each use, inspect complete unit for loose or damaged
parts. Clean the unit using a damp cloth.
3. Wipe off unit with a clean dry cloth.