Lexmark MX610 Series Ftp Kılavuzu

Yazıcı Lexmark MX610 Series için çevrimiçi göz atın veya pdf Ftp Kılavuzu indirin. Lexmark MX610 Series 3 sayfaları. Information guide
Ayrıca Lexmark MX610 Series için: Teknik Not (3 sayfalar), E-Posta Kılavuzu (4 sayfalar), Faks Kılavuzu (4 sayfalar), Kopyalama Kılavuzu (3 sayfalar), Sarf Malzemeleri Kılavuzu (3 sayfalar), Bilgi Kılavuzu (1 sayfalar)

Sayfayı Yazdır
Lexmark MX610 Series Ftp Kılavuzu
FTP Guide
You can scan documents directly from the printer to an FTP server.
Note: You can scan to only one FTP address at a time.
Scanning to an FTP address using the printer control panel
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the printer control panel, navigate to:
FTP > FTP > type the FTP address > Done > Send It

Scanning to an FTP address using a shortcut number

1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the printer control panel, press # on the keypad, and then enter the FTP shortcut number.
4
Touch
> Send It.
Scanning an FTP using the address book
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, navigate to:
FTP > FTP >
> type the name of the recipient > Search
FTP Guide
Page 1 of 3