Alico Optima AP24 Kullanım Kılavuzu - Sayfa 12

Kablosuz Erişim Noktası Alico Optima AP24 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Alico Optima AP24 14 sayfaları. Wireless network equipment optima series
Ayrıca Alico Optima AP24 için: Kullanım Kılavuzu (12 sayfalar)

Sayfayı Yazdır

Checking the Wireless Setup

1. Click on the "Wireless"

button on the left column of

the WinBox window

Then double click on the

"wlan1" line

You will see the window as

shown below. This window

has tabs on the top and

buttons on the right side.

Please note that some of the

tabs are hidden, to look at all

the tabs click on the "..."

square button at the end of the

tabs to see the list as shown.

The AP24/AP58 is setup as a

2.4GHz b/g access point

You can change the SSID if

you like. To hide the SSID

click on the check mark at the

bottom of the window

The AP24/AP58 is setup with manually set frequency channels. If you want the AP24/AP58 to

auto select the frequency setup the DFS mode to either "no radar detect" or "radar detect". In the

"no radar detect" mode the AP24/AP58 scans for the frequency with the lowest interference and

selects that frequency. In the "radar detect mode" the AP24/AP58 selects the frequency like the

"no radar detect" mode, and switches frequency if there is interference afterwards.

Using the Web Interface

The AP24/58 can also be

accessed using a web browser.

However please note the web

interface has limited

functionality. Full

functionality can only be

achieved either via the

Winbox or using the built in

command line interface. To

use the command line

interface you can either use

the Terminal inside the

Winbox window or login via

Telnet or SSH.