Alien Aircraft Super Dragon AG-501 Manuel - Sayfa 4
Oyuncak Alien Aircraft Super Dragon AG-501 için çevrimiçi göz atın veya pdf Manuel indirin. Alien Aircraft Super Dragon AG-501 7 sayfaları. Glow conversion
Sayfayı Yazdır4...Glue GP-01 and GP-04 to the pylon assembly.
5..Glue the 1/4" triangle into the corner of GP-01 and GP-03. Use
clear polyurethane or clear dope to fuel proof the inside of the pylon.
You do not need to use enough to get a nice finish on the wood. A thin
application allowed to soak into the wood will be fine.
6...Assemble the fuel tank. Place it in the pylon assembly. Run the
fuel and vent lines through the holes in GP-01. Use 1/4" foam rubber
on the bottom and the sides to hold the tank in place.
7...Install the throttle pushrod housing as shown here and on the
plan (page 2 of these instructions) Securely glue the housing
into the holes in GP-01 and GP-02.
Page 4