A&E Systems 9500 Değiştirme Talimatları Kılavuzu - Sayfa 2

Aksesuarlar A&E Systems 9500 için çevrimiçi göz atın veya pdf Değiştirme Talimatları Kılavuzu indirin. A&E Systems 9500 6 sayfaları.

Sayfayı Yazdır

b. To keep the 5000 or 7000 Model Awning from unwind-

ing, it must be pinned. See FIGS. 3 & 3A.

FIG. 3

5000 MODEL AWNING

COTTER PIN

NOTE

NOTE: If the awning is installed on a coach, complete the

NOTE

following steps on a step ladder, with the awning fabric

unrolled two feet from the awning rail.

1. Clamp a Vise Grip® tightly on the top casting. Remove

the 1/4-20 hex head machine screw from the top

casting. See FIG. 4.

W W W W W ARNING

ARNING

Severe injuries can result from the rapid spin-off of

the top casting. Use Vise Grips

the top casting. Use Vise Grips® - - - - - NEVER

the top casting. Use Vise Grips

hands - to handle a top casting under spring

tension.

LOCK

LEVER

1/4-20 X 1/2" HEX

HD. MACH. SET SCREW

FIG. 4

MAIN SUPPORT ARM

LOCKING

TAB

C. C. C. C. C. UNWINDING A

UNWINDING A T T T T T ORSION ASSEMBL

UNWINDING A

NEVER

NEVER use bare

NEVER

use bare

NEVER

use bare

TOP

CASTING

VISE-

GRIPS®

MAIN SUPPORT

ARM ASSEMBLY

NOTE

NOTE: Some 5000 and 7000 Model Awning torsion

NOTE

assemblies can not be pinned. If you have this type, the

torsion spring must be unwound before the awning can

be removed from the coach. Follow the instructions in

Section C, Steps 1 and 2.

FIG. 3A

COTTER PIN

ORSION ASSEMBL

ORSION ASSEMBLY SPRING

ORSION ASSEMBL

2. Take the top casting carefully out of the main support

arm (see NOTE below). Slowly let the torsion spring

unwind completely. Repeat Steps 1 & 2 for the opposite

end.

NOTE

NOTE: If the awning's right-hand torsion assembly has

NOTE

been pinned (5000 & 7000 Models), the cotter pin must be

removed from the torsion assembly before the spring can

be unwound. If the awning is an 8000, 8500, 9000, 9500 or

Grande Pavilion Model, the cam lock lever on the right-

hand torsion assembly must be turned clockwise to the roll

up position, before the spring can be unwound.

7000 MODEL AWNING

MAIN SUPPORT ARM

LOCKING

TAB

Y SPRING