Alien Aircraft Corp FunMaster 72 Montaj Talimatları - Sayfa 4
Oyuncak Alien Aircraft Corp FunMaster 72 için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. Alien Aircraft Corp FunMaster 72 5 sayfaları. Internal bombay
Sayfayı Yazdır5...Glue the B-07 / B-08 hinges to the B-06 doors. The B-07 on
the hinges face inboard...face each other as shown.
6...Test fit the doors to the bombay. Insert the 2-56 screws and
nuts not quite tight.
The doors should swing freely. Sand the parts to allow the
proper movement. Sand the faces of the hinges a little extra to
allow for the application of paint without binding.
7...Paint the bombay to match your model. We used 3 thinned coats of clear dope and two coats of white dope. You
may use any paint that you prefer. If you are using a glow motor, be sure to use fuel proof paint.
You do not need to finish the entire bombay. Just the bottom and up about 1 1/2" on the sides. We finished both
sides of the doors.
8...Fit the doors to the bombay. Insert the 2-56 screws and nuts.
Tighten the screws just snug and then loosen them just until the
doors swing freely. Carefully apply a small drop of thick C/A
glue to the nut to lock it in place. Now cut off the end of the
screw close to the nut.
Page 4