A&E Trading DC1800 Manuel - Sayfa 3

Ahizeler A&E Trading DC1800 için çevrimiçi göz atın veya pdf Manuel indirin. A&E Trading DC1800 5 sayfaları. Manual rf handset

Installation

During setup, press between the different steps in less than 4.5 seconds, otherwise the system

will return to its original state.

Controlled movement

Step 1: Connect the DC1149C receiver tot he control box (COMPACT/ SMART) (HS portal)

Step 2: Press 1 x on the setting button of the DC1149C receiver (LED flashes)

Step 3: Press 1 x on the P2 setting button of the handset DC1800 (LED flashes)

Step 4: Press 1 x on the P2 setting button of the handset DC1800 (LED flashes)

Step 5: Press 1 x on the 'up button' on the handset DC1800 (LED flashes)

The DC1800 handset is now connected tot he DC1149C receiver and can be operated by continuously pressing the

'up'or 'down'button. By releasing the button in question, the movement will stop.

- Extra function -

During setup, press between the different steps in less than 4.5 seconds, otherwise the system

will return to its original state. Note: if the setting is repeated, the function will be canceled.

Automatic movement

Step 1: Press 1 x on the P2 setting button of the handset DC1800 (LED flashes)

Step 2: Press 1 x on the 'up button' of the DC1800 handset (LED flashes)

Step 3: Press 1 x on the P2 setting button of the handset DC1800 (LED flashes)

The controlled movement has now been changed to an automated movement. This movement can be controlled

by pressing the 'up' or 'down' button once and the movement will start automatically. By pressing the 'stop'

button the movement will stop.

- Extra function -

During setup, press between the different steps in less than 4.5 seconds, otherwise the system

will return to its original state. Note: handset 'A' is the already paired handset, and handset 'B' is not.

Add a handset

Step 1: Press 1 x on the P2 setting button of the handset DC1800 'A' (LED flashes)

Step 2: Press 1 x on the P2 setting button of the handset DC1800 'A' (LED flashes)

Step 3: Press 1 x on the P2 setting button of the handset DC1800 'B' (LED flashes)

The additional handset 'B' has now been added and can be controlled in the same way as the original

handset 'A'.

A&E Trading b.v. - Lineaire aandrijftechniek | DC1149C + DC1800