ALIEN ENCLOSURES 67-69 CAMARO CONVERTIBLE TRUNK PANEL KIT Talimatlar Kılavuzu - Sayfa 4
Otomobil Aksesuarları ALIEN ENCLOSURES 67-69 CAMARO CONVERTIBLE TRUNK PANEL KIT için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. ALIEN ENCLOSURES 67-69 CAMARO CONVERTIBLE TRUNK PANEL KIT 9 sayfaları.
Sayfayı YazdırAssembly Continued
• Un-upholstered kits – Panels B&C
can be permanently attached or
left separate by using Velcro strips.
Most kits will be partially assem-
bled. Screws and Velcro is provid-
ed. (Figure 4)
• The convertibles have three part
side panels (D&E). These panels
will need to be either glued and/or
stapled together. 7/16 screws are
provided to hold panels together as
they are being glued. (Figure 5a)
They will need to be removed from
the outside before upholstery.
• The side panel set will include an
offset angled block. These will be
marked right and left to insure prop-
er alignment. There may still be
additional sanding needed on the
left and right edges of the panels.
There will need to sanding on the
top edge of the large side panel to
round as desired. (Figure 6)
67-69 f body convertible
Trunk Panel Kit Instructions
Figure 4
A
Figure 5
Figure 6
A
A