AlienPro ALPHA-ILDA Kullanıcı Kılavuzu - Sayfa 3

Aydınlatma Ekipmanları AlienPro ALPHA-ILDA için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AlienPro ALPHA-ILDA 4 sayfaları.

Sayfayı Yazdır

Channel Instruction

0~64

Vertical

CH11

65~127

stretch

128~255

0~2

3~127

Pattern

CH12

128~169

Size

170~211

212~255

Slow

0~3

CH13

Drawing

4~255

Scanning

0~2

CH14

Speed

3~255

Color

CH15

0~255

Speed

Strobe

CH16

0~255

Speed

Maintenance

Maintenance should be performed every 15-day period, by using a sponge which is dipped with

alcohol, rather than wet cloth or other chemical liquid, to clean the mirror.

Always disconnect from the mains when the device is not in use or before cleaning it.

Warning

Power must be disconnected before maintenance or repair. Do not look at the light source directly

To prevent or reduce the risk of electrical shock or fire.do not expose this unit to high tempera-

ture/rain or moisture.

Note:

Don't separate laser machine from laser power and repair them by yourself , otherwise no good

repair service will be supplied.

Horizontal stretch(Manual adjust)

Horizontal stretch(Auto adjust)

Horizontal stretch speed (8 grade)

Original size

Pattern size from small to big (

127

grade)

Pattern dynamic zoon from small to

big (41 grade)

Pattern dynamic zoom from big to

small (41 grade)

Pattern dynamic cycle zoom (

grade)

No function

Slow drawing speed (16 grade)

Default scanning speed (value:6)

252 grade scanning speed

256 grade(slow to fast)

9 grade strobe speed

（0-255）

/31=0~8(0 grade no flash)

w w w . a l i e n p r o . c o m . m x

Foreword

Thank you for purchasing this product. To optimize the performance of this product,prior to

use,please read these operating instructions carefully to familiarise yourself with the basic operation

of this unit.Please keep the manual in safe price for future reference.

This unit has been tested at our factory before being shipped to you, there is no assembly required.

Once after received this product , please take and put carefully. And check cautiously that whether

the product was damaged or not during the transportation.

Checking Parts

Please check if the following parts are included:

1 x Laser Light

1 x Power cable

1 x User manual

Caution

Danger Laser Radiation!

Avoid direct eye exposure!

Laser radiation can cause eye damage or skin damage

All protective measures for a safe operation of this laser must be applied.

Installation

1. Please check the voltage whether is the same with the one showed on the equipment or not.

2. It must ask for the technical person and set the light safety when installation. And let the light

beam at the suitable angle.

3. When install this equipment please make sure there's no flammable surfaces (decorated things,

etc) within at least 2.5M and maintain minimum distance of 0.5M from the equipment to the walls.

4. Please make sure that there's no other equipment or decorating materials obstructed the

exhaust fan and the vent-pipe.

5. Products should be install immobility.

6. In case of safety, it's very important that to connect the earth with line.

Attention

1.Please do not open the bottom cover yourself without permission.Operate it accord the user

manual. Call the technician when the machine breaks down.

2.Please do not see the laser beam directly to avoid any damage.

3.Before connect or disconnect the power, please adjust the luminance of the laser diode to the

least to avoid any damage to the laser diode.

4.This unit should be keep dry, do not use in the rain and dusty environment. It can be use in the

outdoor with the water-proof cover protector.

5. Set the light immobility and try to avoid strong shake or hit.

6.Prevent dust into the equipment to avoid problems.

7.Please keep that there's no other equipment or decorating materials obstructed the exhaust fan

and the vent-pipe when the equipment was working.

w w w . a l i e n p r o . c o m . m x