A&S 800 Kullanıcı Kılavuzu - Sayfa 12
Hoparlör Sistemi A&S 800 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. A&S 800 16 sayfaları. Studio bar
Sayfayı YazdırStandby/ON
When you first connect the main unit to the mains socket, the main unit will be in Standby mode.
•
Press the
button on the unit or on the remote control to switch the unit ON.
•
Press the
button again to switch the unit back to STANDBY mode.
•
Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.
-
If a TV or an external device is connected, the unit will switch on automatically when the TV or the
external device is switched on.
-
When there is no input signal from the unit in over 15 minutes, then it will automatically switch to
Standby mode.
Select Modes
(SOURCE) button repeatedly on the unit or the SOURCE, HDMI buttons on the remote
Press the
control to select the AUX, OPTICAL, COAXIAL, HDMI 1, HDMI 2, HDMI ARC, USB and BT (Bluetooth)
mode. The selected mode will show on the display.
Adjust the Bass Level
Press the BASS button on the remote control to activate bass setup, then press the VOL+/- button to
•
adjust the bass level (bass +5 ~ bass -5).
Turn the Surround Sound ON/OFF
Press the SURROUND button on the remote control to turn on the surround sound. Press this button
•
again to turn off the surround sound.
Adjust the Volume
Press the VOL+ / VOL- buttons on the unit or on the remote control to adjust the volume.
-
If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE
-
button again or press the VOL+ / VOL- buttons on the unit or on the remote control to resume
normal listening.
Adjust the Brightness
-
Press the DIMMER button on the remote control to select brightness level.
Select a Preset Sound Effect
While playing, press the EQ button on the remote control to select desired preset equalisers:
•
Movie (recommended for viewing movies), Music (recommended for listening to music), NEWS
(recommended for listening to NEWS).
Basic Operation
12