A&S 800 Kullanıcı Kılavuzu - Sayfa 8

Hoparlör Sistemi A&S 800 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. A&S 800 16 sayfaları. Studio bar

Placement and Mounting

Placement

A If your TV is placed on a table, you can place the unit on the table directly in front of the TV stand,

centered with the TV screen.

B If your TV is attached to a wall, you can mount the unit on the wall directly below the TV screen.

Note:

Installation must be carried out by qualified

personnel only. Incorrect assembly can result in

severe personal injury and property damage (if

you intend to install this product yourself, you

must check for installations such as electrical

wiring and plumbing that may be buried inside

the wall). It is the installer's responsibility to

verify that the wall will safely support the total load of the unit and wall brackets.

Additional tools (not included) are required for the installation.

Do not overtighten screws.

Keep this instruction manual for future reference.

Use an electronic stud finder to check the wall type before drilling and mounting.

1. Drill 4 parallel holes (Ø 5.5-6 mm each according to wall type) in the wall. The distance between the

holes should be 1106 mm.

2. Firmly fix 1 dowel into each hole in the wall if necessary. Tighten the wall mount brackets on the wall

with screws and screwdriver (not included). Make sure that they are securely installed.

3. Remove the screws at the back of the unit. Install the wall mounting screws into the back of the unit.

4. Lift the unit onto the wall mount brackets and slot into place.

1106 mm

Ø5.5~6mm

32mm

Remove

the screws

Install the wall

mounting screws