Garmin 010-11092-00 - Foot Pod - GPS Receiver Wireless Step Sensor Talimatlar Kılavuzu - Sayfa 4

GPS Garmin 010-11092-00 - Foot Pod - GPS Receiver Wireless Step Sensor için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Garmin 010-11092-00 - Foot Pod - GPS Receiver Wireless Step Sensor 37 sayfaları. Garmin music pedal user manual

Sayfayı Yazdır
To replace the battery:
EN
1. Locate the circular battery cover on the back of the foot pod.
2. Twist the cover counter-clockwise
until it is loose enough to remove.
3. Remove the cover and the battery.
4. Place the new battery into the cover with
the positive side facing the inside of the
cover.
5. Replace cover by aligning the dots and
rotating clockwise.

Technical Specifications

Physical size: L × W × H: 35 mm × 25 mm × 7.5 mm
(excluding clip)
Weight: 10 g (including battery)
Water Resistance: 10 m
transmission range: Minimum 3 m (9.8 ft.)
Speed and distance accuracy: Uncalibrated 95%, calibrated
98%
Battery: User‑replaceable CR2032 (3 volts) Perchlorate
Material – special handling may apply. See
.ca.gov/hazardouswaste/perchlorate.
Battery life: 400 hours run time
operating temperature: From ‑10°C to 60°C (From 14°F
to 140°F)
Sensor Accuracy Range: From 0°C to 40°C (From 32°F to
104°F)
Radio frequency/protocol: 2.4 GHz ANT
System Compatibility: ANT+

Limited Warranty

Garmin's standard limited warranty applies to this accessory.
For more information, see the Important Safety and Product
Information in the Garmin product box.
EN–
Unlock
™
™
Lock
www.dtsc
instructions