Alinco DJ-PN446 Kullanım Kılavuzu - Sayfa 12

Alıcı-Verici Alinco DJ-PN446 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Alinco DJ-PN446 16 sayfaları. Pmr446 fm transceiver

Sayfayı Yazdır

SET MODE

Functions in the below chart are user programmable at factory default. If the operation described here
can't be performed, please contact your dealer as it should be dealer-programmed before delivery to
you. Please read P.6 to 13 in advance to learn about details of functions.
● In operation mode, press P-key twice. The number shown on right upper corner starts to blink.
● Press P-key again to select a menu to edit. Pressing P-key will switch the menu.
● In the menu to edit, press ▲/▼keys to select a parameter of your preference.
● Press P-key to set and continue to edit, or press PTT to complete the setting and exit.
Menu
Function
LCD display
CHANNEL
1
Number
CTCSS / DCS
OF-K3()
2
KEY LOCK
LC
3
VOX
BГ
4
5
Squelch
Sq
6
BEEP
bP
7
END BEEP
Eb
LED Control
Ld
8
10
Available setting
Default setting
1-99 channels
1ch
CTCSS is 1 – 39 /
CTCSS 10
DCS is A1 – K3
ON / OFF shown as OF
OFF
OFF / 1 – 9
OFF
OFF-9
4
ON / OFF
ON
ON / OFF
ON
ON / OFF /AO
AO (Automatic off)
SET MODE
Please readP.9 for key oparations
1) CTCSS/DCS Setup:
This is a selective calling function. The transmitting signal carries a subaudible CTCSS/DCS tone, and
receiver detects such tone to determine if incoming signal matches your user group's or not. Only
matching signal can open the squelch and hear the audio. DJ-PN446 is programmed with CTCSS and
DCS in factory, but you may change such tones according to your preference. 39 tones are available
in CTCSS, 104 in DCS system. Refer to P.17 for preprogrammed channel details, P.18 and P.19 for
tone lists. All radios in the group should be set to the same tone. Please note that this function does
not eliminate interferences of other users, but just filters unwanted audio to hear by remaining squelch
closed. To disable the tone operation, set OF to all radios.

2) Key lock ON/OFF [LC]:

This function is to lock keys except PTT and P-key to avoid mis-operations. When activated (ON),
"Key icon" appears on the display. Select OFF(OF) to disable, and the icon disappears.
11