AEG 79669GO-MN Kullanıcı Kılavuzu - Sayfa 15
Fırın AEG 79669GO-MN için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG 79669GO-MN 48 sayfaları.
Sayfayı Yazdır
If the Pyrolysis function operates, the door is
locked and the symbol of a key comes on in
the display .
To deactivate the function, press
shows a message . Press
again and then
confirm.
When you deactivate the appliance, the lock
function also deactivates .
Set + Go
The function lets you set a heating function (or a
programme) and use it later with one press of any
symbol .
1 . Activate the appliance .
2 . Set a heating function .
3 . Press
again and again until the display shows:
Duration .
4 . Set the time .
5 . Press
again and again until the display shows: Set
+ Go
6 . Press
to confirm.
Press any symbol (except for
Set + Go . The set heating function starts . When the
heating function ends, an acoustic signal sounds .
• Function Lock is on when the heating function
operates .
• The menu: Basic Settings lets you activate and
deactivate the function: Set + Go .
Automatic Switch-Off
For safety reasons the appliance turns off
automatically after some time if a heating function
operates and you do not change any settings .
Temperature (°C)
Switch-off time (h)
30 - 115
12.5
120 - 195
8.5
200 - 245
5.5
250 - maximum
1.5
The Automatic switch-off does not work with the
functions: Light, Food Sensor, Duration, End Time .
Brightness of the display
There are two modes of display brightness:
• Night brightness - when the appliance is
deactivated, the brightness of the display is lower
between 10 PM and 6 AM .
• Day brightness:
– when the appliance is activated .
– if you touch a symbol during the night brightness
– if the appliance is deactivated and you set the
. The display
to
Cooling Fan
When the appliance operates, the cooling fan
activates automatically to keep the surfaces of the
appliance cool . If you deactivate the appliance,
the cooling fan can continue to operate until the
appliance cools down .
) to start the function:
(apart from ON / OFF), the display goes back to
the day brightness mode for the next 10 seconds .
function: Minute Minder . When the function ends,
the display goes back to the night brightness .
15