AEG 944 187 934 Kullanıcı Kılavuzu - Sayfa 14
Fırın AEG 944 187 934 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG 944 187 934 48 sayfaları.
Sayfayı Yazdır
- 1. Table of Contents
- 2. Safety Information
- 3. Safety Instructions
- 4. Product Description
- 5. Control Panel
- 6. Before First Use
- 7. Daily Use
- 8. Clock Functions
- 9. Automatic Programmes
- 10. Using the Accessories
- 11. Additional Functions
- 12. Hints and Tips
- 13. Care and Cleaning
- 14. Troubleshooting
- 15. Energy Efficiency
14
www.aeg.com
The display shows flashing
7. Press
and press
minutes and then the hours.
The oven turns on automatically later on,
works for the set Durationand stops at
the set End Time. When the set time
ends, the signal sounds for 2 minutes.
The display shows flashing
time setting . The oven turns off
automatically.
8. Press a sensor field to stop the
signal.
9. Turn off the oven.
When the Time Delay
function is turned on, the
display shows a symbol of
the heating function,
a dot and
which clock function is on in
the Clock / residual heat
display.
7.6 How to set: Set + Go
You can use the Set + Go function only
when the Duration is set.
1. Set a heating function and
temperature.
2. Set the Duration.
3. Press
display shows flashing
4. Press
function.
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to Safety chapters.
There are 20 automatic programmes.
Use an automatic programme or recipe
when you do not have the knowledge or
experience on how to prepare a dish.
The display shows the default cooking
times for all automatic programmes.
.
or
to set the End Time
. First you set the
and the
with
. The dot shows
again and again until the
.
to set the Set + Go
The display shows
indicator. This indicator shows which
clock function is activated.
5. Press a sensor field (apart from ON /
OFF) to start the Set + Go function.
7.7 How to set: Minute Minder
1. Press
.
The display shows flashing
2. Press
to switch between options.
First you set the seconds, then the
minutes and the hours.
3. Press
or
Minder and
to confirm.
4. Press
or the Minute Minder starts
automatically after 5 seconds.
When the set time ends, the signal
sounds for 2 minutes and the display
shows flashing 00:00 and
5. Press a sensor field to stop the
signal.
7.8 How to set: Count Up
Timer
1. To reset the Count Up Timer press:
again and again until display
shows flashing
2. Press and hold:
display shows "00:00" the Count Up
Timer starts to count up again.
8.1 List of automatic
programmes
Programme
1
ROAST BEEF
2
ROAST PORK
3
ROAST VEAL
4
ROAST LAMB
5
ROAST GAME
and
with an
and "00".
to set the Minute
.
.
. When the