Garmin Alpha 100 Kullanıcı El Kitabı - Sayfa 16

GPS Garmin Alpha 100 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin Alpha 100 24 sayfaları. Multi-dog tracking gps
Ayrıca Garmin Alpha 100 için: Kullanıcı El Kitabı (26 sayfalar), Hızlı Referans (2 sayfalar), Ürün Bilgileri (4 sayfalar), Kullanıcı El Kitabı (26 sayfalar), Kullanıcı El Kitabı (27 sayfalar), Kullanıcı El Kitabı (24 sayfalar)

Sayfayı Yazdır

Day Highlight Color: Sets the color for selections made when

in day mode.

Night Highlight Color: Sets the color for selections made when

in night mode.

Setting the Device Tones

You can customize tones for messages, keys, warnings, and

alarms.

Select Setup > Tones.

Select a tone for each audible type.

Map Settings

Select Setup > Map.

Orientation: Adjusts how the map is shown on the page. North

Up shows north at the top of the page. Track Up shows your

current direction of travel toward the top of the page.

Automotive Mode shows an automotive perspective with

the direction of travel at the top.

Guidance Text: Sets when the guidance text on the map is

shown.

Dashboard: Sets a dashboard to display on the map. Each

dashboard shows different information about your route or

your location.

Map Information: Enables or disables the maps currently

loaded on the device.

Map Speed: Adjusts the speed at which the map is drawn. A

faster map drawing speed decreases the battery life.

Advanced Map Settings

Select Setup > Map > Advanced Setup.

Auto Zoom: Automatically sets the zoom level for optimal use

of your map. When Off is selected, you must zoom in or out

manually.

Detail: Sets the amount of detail shown on the map. Showing

more detail may cause the map to redraw more slowly.

Shaded Relief: Shows detail relief on the map (if available) or

turns off shading.

Vehicle: Allows you to select a position icon, which represents

your position on the map.

Zoom Levels: Sets the zoom level at which map items will

appear. Map items do not appear when the map zoom level

is higher than the selected level.

Text Size: Sets the text size for map items.

Track Settings

Select Setup > Tracks.

Track Log: Turns track recording on or off.

Record Method: Sets a track recording method. Auto records

the tracks at a variable rate to create an optimum

representation of your tracks.

Interval: Sets a track log recording rate. Recording points more

frequently creates a more-detailed track, but fills the track log

faster.

Auto Archive: Sets an automatic archive method to organize

your tracks. Tracks are saved and cleared automatically

based on the user setting.

Color: Sets the color of the track line on the map.

Routing Settings

The device calculates routes optimized for the type of activity

you are doing. The routing settings available vary based on the

activity selected.

Select Setup > Routing.

Activity: Sets an activity for routing. The device calculates

routes optimized for the type of activity you are doing.

Route Transitions: Sets how the device routes from one point

on the route to the next. This setting is available only for

some activities. Distance routes you to the next point on the

route when you are within a specified distance of your

current point.

Lock On Road: Locks the position icon, which represents your

position on the map, onto the nearest road.

Changing the Units of Measure

You can customize units of measure for distance and speed,

elevation, depth, temperature, and pressure.

Select Setup > Units.

Select a measurement type.

Select a unit of measure for the setting.

Time Settings

Select Setup > Time.

Time Format: Sets the device to show time in a 12-hour or 24-

hour format.

Time Zone: Sets the time zone for the device. Automatic sets

the time zone automatically based on your GPS position.

Position Format Settings

NOTE: Do not change the position format or the map datum

coordinate system unless you are using a map or chart that

specifies a different position format.

Select Setup > Position Format.

Position Format: Sets the position format for the location

information.

Map Datum: Sets the coordinate system on which the map is

structured.

Map Spheroid: Shows the coordinate system the device is

using. The default coordinate system is WGS 84.

Heading Settings

You can customize the compass settings.

Select Setup > Heading.

Display: Sets the type of directional heading shown on the

compass.

North Reference: Sets the north reference used on the

compass.

Go To Line/Pointer: Sets the behavior of the pointer that

appears on the map. Bearing points in the direction of your

destination. Course (CDI) shows your relationship to the

course line leading to the destination.

Compass: Automatically switches from an electronic compass

to a GPS compass when you are traveling at a higher rate of

speed for a period of time.

Calibrate Compass: Calibrates the compass

Compass).

Altimeter Settings

Select Setup > Altimeter.

Auto Calibration: Automatically calibrates the altimeter each

time the device is turned on.

Barometer Mode: Sets how the device measures barometric

information. Variable Elevation allows the barometer to

measure changes in elevation while you are moving. Fixed

Elevation assumes the device is stationary at a fixed

elevation, so the barometric pressure should change only

due to weather.

(Calibrating the

Customizing Your Device