A+ Corporation, LLC. Genie Direct Drive 752 Kurulum ve Çalıştırma Talimatları
Test Ekipmanları A+ Corporation, LLC. Genie Direct Drive 752 için çevrimiçi göz atın veya pdf Kurulum ve Çalıştırma Talimatları indirin. A+ Corporation, LLC. Genie Direct Drive 752 5 sayfaları.
Sayfayı YazdırAn ISO 9001:2008 certified company
Safety Warnings
!
Failure to abide by any of the safety warnings below may result in equipment failure or serious injury and death.
Do not exceed any equipment pressure ratings
}
The probe must be installed into the process line by means of the appropriate size female full port ball valve
}
Only the lowest wrench flats on the base, nearest to the NPT male threads, can be used when installing into the process ball valve
}
DO NOT use the wrench flats on the packing adjustment nut, located on the top of the base, for installation into process ball valve.
}
Not designed for external fire.
}
Prior to use in a system, a properly sized relief device is to be installed which limits the use to 110% of the MAWP.
}
Tools Required
1-3/8" open end wrench
}
7/16" open end wrench
}
(2) 7/8" open end wrenches
}
Tools Required
1-3/16" open end wrench
}
Fittings Required
Appropriate size female full port ball valve
}
Genie
Direct Drive 752
®
Installation & Operation Instructions
Manufacturing
A+ Corporation, LLC
Call for expert product application assistance:
41041 Black Bayou Rd.
Phone: (225)-644-5255 Website: www.geniefilters.com
Gonzales, LA 70737
Fax:
Contact
Information
(225)-644-3975 E-mail: [email protected]
©
2010 A+ Corporation, LLC. All rights reserved.
SCC-752-InsInstallationOperation_0514