AEG BEB331010M Kullanıcı Kılavuzu - Sayfa 25

Fırın AEG BEB331010M için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG BEB331010M 28 sayfaları.

Sayfayı Yazdır

When the cleaning is completed, do the

above steps in the opposite sequence.

Install the smaller panel first, then the

larger and the door.

WARNING!

Make sure that the glasses

are inserted in the correct

position otherwise the

surface of the door may

overheat.

10.5 Replacing the lamp

Put a cloth on the bottom of the interior

of the appliance. It prevents damage to

the lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

11. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

11.1 What to do if...

Problem

You cannot activate or oper-

ate the oven. The display

shows "400" and an acoustic

signal sounds.

The oven does not heat up.

The lamp does not operate.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The top lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300

°C heat-resistant lamp.

4. Install the glass cover.

Possible cause

The oven is incorrectly con-

nected to an electrical sup-

ply.

The oven is deactivated.

The clock is not set.

The necessary settings are

not set.

The fuse is blown.

The lamp is defective.

ENGLISH

Remedy

Check if the oven is correctly

connected to the electrical

supply (refer to the connec-

tion diagram if available).

Activate the oven.

Set the clock.

Make sure that the settings

are correct.

Make sure that the fuse is

the cause of the malfunction.

If the fuse is blown again

and again, contact a quali-

fied electrician.

Replace the lamp.