Alinea EMPIRE II-2 Montaj ve Talimatlar - Sayfa 13

İç Mekan Mobilyaları Alinea EMPIRE II-2 için çevrimiçi göz atın veya pdf Montaj ve Talimatlar indirin. Alinea EMPIRE II-2 17 sayfaları. Electric table
Ayrıca Alinea EMPIRE II-2 için: Montaj ve Talimatlar (10 sayfalar)

Sayfayı Yazdır
Alinea EMPIRE II-2 Montaj ve Talimatlar
i. Adjust Vibration Sensitivity-6FS
1. Keep pressing "M" for 3 seconds.Handset will display "S---", then release
pressing Button "M" and press Button "M" again to enter,the code "
appear.
2. Press button "Up"/"Down" to be "
display current vibration sensitivity level (L5).We have 9 levels of vibration
sensitivity,from L1 to L9,L1 is the most sensitivity,L9 is the least sensitivity.L5 is
our factory setting vibration sensitivity.
3. Press button "Up"/"Down" to select your favourite vibration sensitivity level, then
press button "M" to preserve and quit,pls wait for 2 seconds and it will display
current height.
j. Adjust the lowest height display and height range-7SH
1. Keep pressing Button "M" for 3 seconds.Handset will display "S---", then release
pressing Button "M" and press Button "M" again to enter,the code "
appear.
2. Press button "Up"/"Down" to be "
display
and
.
:Mean to set the lowest position display height.
:Mean to set a new lowest position
:Mean to set a new highest position
3. Press button "Up"/"Down" to be
current lowest height,you can Press button "Up"/"Down" to adjust the lowest
height display,then press button "M" to preserve and quit,pls wait for 2 seconds
and it will display new lowest height.
4. Press button "Up"/"Down" to be
current lowest height,you can Press button "Up" set a new lowest position,then
press button "M" to preserve and quit,pls wait for 2 seconds and it will display
height.New Lowest position finished setting.
5. Press button "Up"/"Down" to be
current highest height,you can Press button "Down" to set a new highest
position,then press button "M" to preserve and quit,pls wait for 2 seconds and it
will display height.New Highest position finished setting.
6. After setting,desk can only motion between new lowest position and new highest
position.
6FS"
7SH"
,you also can press button "Up"/"Down",so that it will display
,Then press button "M" to enter, this will
,Then press button "M" to enter, this will
,Then press button "M" to enter,will display
,Then press button "M" to enter,will display
,Then press button "M" to enter,will display
1Un
" will then
1Un
" will then
,
Page 5 of 7