Alinking ALC-9352 Hızlı Kılavuz - Sayfa 2
IP Kamera Alinking ALC-9352 için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Alinking ALC-9352 4 sayfaları. Fixed dome ip camera
Sayfayı YazdırConnection diagram
Step
Connect the product to the switch hub and PC.
1
Prepare the product, your PC and
switch hub ready for connection.
Prepare the product, your PC and switch hub
ready for connection.Make sure that your PC
has a LAN port available for connection to the
network cable of the product.
2
Connect the product to the power
source (as shown in the figure).
Connect the product to the power source (as
shown in the figure).The product can operate
on AC24V. Please connect with your power
adaptor directly.
3
Connect the product to the switch
hub (as shown in the figure).
Use a network cable and plug it in the LAN port
of the product. Plug the other end of the cable in
the LAN port of the hub.
HUB
power
HUB
4
Connect the switch hub to your PC
(as shown in the figure).
5
Connect all the necessary I/O follow
the hardware installation guide.
6
Turn on the power.
Turn on the power of the PC and hub.
Attention
1. Please refer to user manual for more detailed
explanation of the hardware installation.
2. Where no switch hub is available, you can search and .
set up the camera using the network peering approach.
However, you may need a jumper and need to change
the LAN configuration on your PC for this purpose. It is
recommended to request a qualified engineer for the
connection or execute the network peering referring to
the user's manual
Speaker
MIC
IR Infrared receiver
High dB alarm
Alarm
DC out (3V)
Power
PC
HUB