Garmin TREAD 010-02406-00 Kullanıcı El Kitabı - Sayfa 7
GPS Garmin TREAD 010-02406-00 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin TREAD 010-02406-00 38 sayfaları.
Sayfayı Yazdır
Getting started
See the Important safety and product information guide in the
product box for product warnings and other important
information.
1
Connect to a Wi‑Fi
®
network
page
23)(optional).
2
Pair your Bluetooth
®
phone and headset
and Headset, page
13) (optional).
3
Update the maps and software on your device
updates, page
24).
4
Acquire GPS signals
(Acquiring GPS signals, page
5
Mount the device and connect it to power
page
2).
6
Adjust the screen brightness
brightness, page
1).
7
Navigate to your destination
Device Overview
power key
microSD
memory card slot
®
USB power and data port
Turning the device on or off
• To turn the device on, press the power button or connect the
device to power.
• To put the device in power saving mode, press the power
button while the device is on.
While in power saving mode, the screen is off and the device
uses very little power, but it can wake instantly for use.
TIP: you can charge your device faster by putting it in power
saving mode while charging the battery.
• To turn off the device completely, hold the power button until
a prompt appears on the screen and select Off.
The prompt appears after five seconds. If you release the
power button before the prompt appears, the device enters
power saving mode.
Acquiring GPS signals
When you turn on your navigation device, the GPS receiver
must collect satellite data and establish the current location. The
time required to acquire satellite signals varies based on several
factors, including how far you are from the location where you
last used your navigation device, whether you have a clear view
of the sky, and how long it has been since you last used your
navigation device. The first time you turn on your navigation
device, it may take several minutes to acquire satellite signals.
1
Turn on the device.
2
Wait while the device locates satellites.
Getting started
WARNING
‑ Fi Network,
(Connecting to a Wi
(Pairing Your Phone
(Product
1).
(Installation,
(Adjusting the screen
(Starting a route, page
14).
3
If necessary, go to an open area away from tall buildings and
trees.
in the status bar indicates the satellite signal strength. When
at least half of the bars are filled, the device is ready for
navigation.
Status bar icons
The status bar is located at the top of the main menu. The status
bar icons display information about features on the device. You
can select some icons to change settings or view additional
information.
GPS signal status. Hold to view GPS accuracy and acquired
satellite information
(Viewing GPS signal status, page
Bluetooth technology status. Select to view the Bluetooth
settings
(Bluetooth settings, page
Wi-Fi signal strength. Select to change the Wi-Fi settings
settings, page
22).
Connected to hands-free calling. Select to place a phone call
(Hands-free calling, page
Active vehicle profile. Select to view the vehicle profile settings.
Current time. Select to set the time
Battery charge level.
Tread app connection status
page
13).
Temperature. Select to view the weather forecast
Weather Forecast, page
Fuel status. Select to view fuel tracking information
tracking, page
21).
Using the on-screen buttons
On-screen buttons allow you to navigate the pages, menus and
menu options on your device.
• Select
to return to the previous menu screen.
• Hold
to quickly return to the main menu.
• Select
or
to scroll through lists or menus.
• Hold
or
to scroll faster.
• Select
to see a context-based menu of options for the
current screen.
Adjusting the volume
1
Select
.
2
Select an option:
• Use the slider bar to adjust the volume.
• Select
to mute the device.
• Select a tick box to enable or disable additional sound
options.
Using the audio mixer
You can use the audio mixer to set the volume levels for
different audio types, such as navigation prompts or phone calls.
The level for each audio type is a percentage of the master
volume.
1
Select
.
2
Select Mixer.
3
Use the sliders to adjust the volume for each audio type.
Adjusting the screen brightness
1
Select
> Display > Brightness.
2
Use the slider bar to adjust the brightness.
29).
22).
14).
(Setting the Time, page
(Pairing Your Phone and Headset,
(Viewing the
10).
(Fuel
‑ Fi
(Wi
22).
1