Garmin Zumo 660 Kullanıcı El Kitabı - Sayfa 11

GPS Garmin Zumo 660 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin Zumo 660 48 sayfaları. Garmin gps receiver - car gps user manual
Ayrıca Garmin Zumo 660 için: Kurulum Talimatları (4 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Hızlı Başlangıç Kılavuzu (28 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Kurulum Talimatları Kılavuzu (46 sayfalar), (Almanca) Hızlı başlangıç kılavuzu (8 sayfalar)

Sayfayı Yazdır
Garmin Zumo 660 Kullanıcı El Kitabı

Following Your Route

Your route is marked with a magenta line.
As you travel, your zūmo guides you to your
destination with voice prompts, arrows on
the map, and directions at the top of the map.
The upper-left corner indicates the distance
to your next maneuver and the lane you
should be in for the maneuver.
If you deviate from the original route, your
zūmo recalculates the route and provides
new directions.
A speed limit icon could appear as you travel
on major roadways.
Road Tech
zūmo 660 Owner's Manual
™
Adding a Via Point
You can add a stop (via point) to your route.
The zūmo gives you directions to the stop
and then to your final destination.
1. With a route active, touch
To?.
2. Search for the extra stop.
3. Touch Go!.
4. Touch
Add As a Via Point
stop before your destination.
If you want to add more than one stop to the
route, edit the current route. See
Taking a Detour
1. With a route active, touch Menu.
2. Touch Detour.
The zūmo attempts to get you back on your
original route as quickly as possible. If the
route you are currently taking is the only
reasonable option, the zūmo might not
calculate a detour.
Stopping the Route
1. With a route active, touch Menu.
2. Touch Stop.

Adjusting the Volume

Menu
>
Where
From the Menu page, touch Volume. Touch
and
Touch
Mute
To adjust the volume levels for the voice
to add this
prompts, the media player, and the phone,
touch Mixer. Adjust the levels as needed.
Touch
Restore
page
9.
to the original levels.
Press and release the power button to quickly access
the volume and brightness settings.
Getting Started
to adjust the master volume.
to mute all audio.
to return the volume settings
NOTe