Garmin fenix 2 Kullanıcı El Kitabı - Sayfa 16

İzle Garmin fenix 2 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin fenix 2 26 sayfaları. Sports and fitness gps-devices
Ayrıca Garmin fenix 2 için: Hızlı Kılavuz (25 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar)

Sayfayı Yazdır

1. Clock

Alert Name Alert Type

Description

Distance

Event,

You can set an interval, a custom distance

recurring

from your final destination, or a custom

distance if you go off-course from a track

or route.

Elevation

Event, range,

You can set minimum and maximum

recurring

elevation values. You can also set the

device to alert you when you ascend or

descend a specified amount.

Heart Rate Range

You can set minimum and maximum heart

rate values or select zone changes. See

About Heart Rate Zones

Zone

Nav. Arrival Event

You can set alerts for reaching waypoints

and the final destination of a track or route.

Pace

Range

You can set minimum and maximum pace

values.

Power

Range

You can set the high or low power level.

Proximity

Recurring

See

Speed

Range

You can set minimum and maximum

speed values.

Time

Event,

You can set an interval, a custom time

recurring

until sunset, or a custom time from your

estimated time of arrival.

Setting an Alert

Hold MENU.

Select Settings > Activity.

Select an activity.

NOTE: This feature is not available for all activities.

Select Alerts.

Select the alert name.

If necessary, select the type of alert.

Select a zone, enter the minimum and maximum values, or

enter a custom value for the alert.

If necessary, turn on the alert.

For event and recurring alerts, a message appears each time

you reach the alert value. For range alerts, a message appears

each time you exceed or drop below the specified range

(minimum and maximum values).

Setting a Proximity Alarm

Proximity alarms alert you when you are within a specified

range of a particular location.

Hold MENU.

Select Settings > Activity.

Select an activity.

NOTE: This feature is not available for all activities.

Select Alerts > Proximity > Edit > Create New.

Select a location.

Enter a radius.

Select Done.

Using Auto Pause

You can use Auto Pause to pause the timer automatically when

you stop moving. This feature is helpful if your activity includes

stop lights or other places where you need to or stop.

NOTE: History is not recorded while the timer is stopped or

paused.

Hold MENU.

Select Settings > Activity.

Select an activity.

NOTE: This feature is not available for all activities.

Select Auto Pause.

and

Heart Rate

Calculations.

Setting a Proximity

Alarm.

Auto Lap ®

Marking Laps by Distance

You can use Auto Lap to mark a lap at a specific distance

automatically. This feature is helpful for comparing your

performance over different parts of an activity (for example,

every 1 mile or 5 kilometers).

Hold MENU.

Select Settings > Activity.

Select an activity.

NOTE: This feature is not available for all activities.

Select Auto Lap.

Select a distance.

Each time you complete a lap, a message appears that displays

the time for that lap. The device also beeps or vibrates if audible

tones are turned on

(General

If necessary, you can customize the data pages to display

additional lap data

(Customizing the Data

UltraTrac

The UltraTrac feature is a GPS setting that records track points

and sensor data less frequently. Enabling the UltraTrac feature

increases battery life but decreases the quality of recorded

activities. You should use the UltraTrac feature for activities that

demand longer battery life and for which frequent sensor data

updates are less important. The default interval between track

points is one point per minute. You can adjust the interval.

3D Speed and Distance

You can set 3D speed and distance to calculate your speed or

distance using both your elevation change and your horizontal

movement over ground. You can use it during activities such as

skiing, climbing, navigating, hiking, running, or biking.

Sensors Settings

• You can calibrate and configure the internal compass

(Compass

Settings).

• You can calibrate and configure the internal barometric

altimeter

(Altimeter

Settings).

• You can pair and configure ANT+ sensors

Compass Settings

Hold MENU, and select Settings > Sensors > Compass.

Display: Sets the directional heading on the compass to

degrees or milli-radians.

North Ref.: Sets the north reference of the compass

the North

Reference).

Mode: Sets the compass to use either a combination of GPS

and the electronic sensor data when moving (Auto) or GPS

data only (Off).

Calibrate: Allows you to manually calibrate the compass sensor

(Calibrating the

Compass).

Setting the North Reference

You can set the directional reference used in calculating

heading information.

Hold MENU.

Select Settings > Sensors > Compass > North Ref..

Select an option:

• To set geographic north as the heading reference, select

True.

• To set the magnetic declination for your location

automatically, select Magnetic.

• To set grid north (000º) as the heading reference, select

Grid.

Settings).

Pages).

(ANT+

Sensors).

(Setting

Customizing Your Device