Garmin Fenix 3/HR Kullanıcı El Kitabı - Sayfa 21
İzle Garmin Fenix 3/HR için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin Fenix 3/HR 34 sayfaları.
Sayfayı Yazdır
4
Select an option:
• Select Status to show or hide the widget from the widget
loop.
• Select Move Up or Move Down to change the location of
the widget in the widget loop.
VIRB Remote
The VIRB remote function allows you to control your VIRB
action camera using your device. Go to
to purchase a VIRB action camera.
Controlling a VIRB Action Camera
Before you can use the VIRB remote function, you must enable
the remote setting on your VIRB camera. See the VIRB Series
Owner's Manual for more information. You must also set the
VIRB widget to be shown in the widget loop
Widget Loop, page
16).
1
Turn on your VIRB camera.
2
On your fēnix 3 device, select UP or DOWN from the watch
face to view the VIRB widget.
3
Wait while the device connects to your VIRB camera.
4
Select an option:
• To record video, select START.
The video counter appears on the fēnix 3 screen.
• To stop recording video, select STOP.
• To take a photo, select DOWN.
Customizing Your Device
Activity App Settings
These settings allow you to customize each preloaded activity
app based on your needs. For example, you can customize data
pages and enable alerts and training features. Not all settings
are available for all activity types.
Hold UP, select Settings > Apps, and select an activity.
Data Screens: Enables you to customize data screens for the
activity
(Customizing the Data Screens, page
also show or hide a map data screen for some activities.
Alerts: Sets the training or navigation alerts for the activity.
Metronome: Plays tones at a steady rhythm to help you
improve your performance by training at a faster, slower, or
more consistent cadence
Auto Lap: Sets the options for the Auto Lap
page
18).
Auto Pause: Sets the device to stop recording data when you
stop moving or when you drop below a specified speed
(Enabling Auto Pause
, page
®
Auto Climb: Enables the device to detect elevation changes
automatically using the built-in altimeter.
Auto Run: Enables the device to detect ski runs automatically
using the built-in accelerometer.
3D Speed: Calculates your speed using your elevation change
and your horizontal movement over ground
Distance, page
18).
3D Distance: Calculates your distance traveled using your
elevation change and your horizontal movement over ground.
Lap Key: Enables you to record a lap or a rest during the
activity.
Auto Scroll: Enables you to move through all of the activity data
screens automatically while the timer is running
Scroll, page
18).
GPS: Sets the mode for the GPS antenna
page
19).
Customizing Your Device
www.garmin.com/VIRB
(Customizing the
17). You can
(Using the Metronome, page
feature
(Auto Lap,
®
18).
(3D Speed and
(Using Auto
(UltraTrac,
Pool Size: Sets the pool length for pool swimming
Pool Swim, page
Stroke Detect.: Enables stroke detection for pool swimming.
Power Save: Sets the power-save timeout setting for the activity
(Power Save Timeout Settings, page
Background Color: Sets the background color of each activity
to black or white.
Accent Color: Sets the accent color of each activity to help
identify which activity is active.
Status: Shows or hides the activity in the apps list.
Move Up: Adjusts the position of the activity in the apps list.
Move Down: Adjusts the position of the activity in the apps list.
Remove: Deletes the activity.
NOTE: This deletes the activity from the apps list and all
user-entered activity settings. You can restore all of the
device settings to the factory default values to add a removed
activity back to the list
page
22).
Rename: Sets the activity name.
Customizing the Data Screens
You can show, hide, and change the layout and content of data
screens for each activity.
1
Hold UP.
2
Select Settings > Apps.
3
Select the activity to customize.
4
Select Data Screens.
5
Select a data screen to customize.
6
Select an option:
• Select Status to turn the data screen on or off.
• Select Layout to adjust the number of data fields on the
data screen.
• Select a field to change the data that appears in the field.
Adding a Map to an Activity
You can add the map to the data screens loop for an activity.
1
Hold UP.
2
Select Settings > Apps.
3
Select the activity to customize.
4
Select Data Screens > Map.
6).
5
Select Status to turn the map on or off.
6
Select Orientation.
7
Select an option:
• To show north at the top of the page, select North Up.
• To show your current direction of travel toward the top of
the page, select Track Up.
8
Select User Locations to show or hide saved locations on
the map.
9
Select Auto Zoom to select automatically the optimal zoom
level for the map.
When Off is selected, you must zoom in or out manually.
Alerts
You can set alerts for each activity, which can help you to train
toward specific goals, to increase your awareness of your
environment, and to navigate to your destination. Some alerts
are available only for specific activities. There are three types of
alerts: event alerts, range alerts, and recurring alerts.
Event alert: An event alert notifies you once. The event is a
specific value. For example, you can set the device to alert
you when you reach a specified elevation.
7).
19).
(Restoring All Default Settings,
(Going for a
17