Garmin Fenix 5x Kullanıcı El Kitabı - Sayfa 32
İzle Garmin Fenix 5x için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin Fenix 5x 49 sayfaları.
Sayfayı Yazdır
Lap Key: Enables you to record a lap or a rest during
the activity.
Auto Scroll: Enables you to move through all of the
activity data screens automatically while the timer is
running
(Using Auto Scroll, page 33)
Segment Alerts: Enables prompts that alert you to
approaching segments.
GPS: Sets the mode for the GPS antenna. Using GPS
+ GLONASS provides increased performance in
challenging environments and faster position
acquisition. Using the GPS+ GLONASS option can
reduce battery life more than using the GPS option
only. Using the UltraTrac option records track points
and sensor data less frequently
Pool Size: Sets the pool length for pool swimming.
Stroke Detect.: Enables stroke detection for pool
swimming.
Power Save Timeout: Sets the power-save timeout
setting for the activity
page 33)
.
Background Color: Sets the background color of each
activity to black or white.
Accent Color: Sets the accent color of each activity to
help identify which activity is active.
Rename: Sets the activity name.
Restore Defaults: Allows you to reset the activity
settings.
Customizing the Data Screens
You can show, hide, and change the layout and content
of data screens for each activity.
1 Hold MENU.
2 Select Settings > Activities & Apps.
3 Select the activity to customize.
4 Select the activity settings.
5 Select Data Screens.
6 Select a data screen to customize.
7 Select an option:
• Select Layout to adjust the number of data fields
on the data screen.
• Select a field to change the data that appears in
the field.
• Select Reorder to change the location of the data
screen in the loop.
• Select Remove to remove the data screen from the
loop.
8 If necessary, select Add New to add a data screen to
the loop.
You can add a custom data screen, or select one of
the predefined data screens.
Adding a Map to an Activity
You can add the map to the data screens loop for an
activity.
FĒNIX
5X
®
.
(UltraTrac, page 33)
(Power Save Timeout Settings,
1 Hold MENU.
2 Select Settings > Activities & Apps.
3 Select the activity to customize.
4 Select the activity settings.
5 Select Data Screens > Add New > Map.
Alerts
You can set alerts for each activity, which can help
you to train toward specific goals, to increase your
awareness of your environment, and to navigate to
your destination. Some alerts are available only for
specific activities. There are three types of alerts: event
alerts, range alerts, and recurring alerts.
.
Event alert: An event alert notifies you once. The
event is a specific value. For example, you can set
the device to alert you when you reach a specified
elevation.
Range alert: A range alert notifies you each time the
device is above or below a specified range of values.
For example, you can set the device to alert you
when your heart rate is below 60 beats per minute
(bpm) and over 210 bpm.
Recurring alert: A recurring alert notifies you each time
the device records a specified value or interval. For
example, you can set the device to alert you every 30
minutes.
Alert Name Alert Type
Cadence
Range
Event,
Calories
recurring
Custom
Recurring
Distance
Recurring
Elevation
Range
Heart Rate Range
Pace
Range
Power
Range
Proximity
Event
Run/Walk
Recurring
Description
You can set minimum and
maximum cadence values.
You can set the number of
calories.
You can select an existing
message or create a custom
message and select an alert
type.
You can set a distance
interval.
You can set minimum and
maximum elevation values.
You can set minimum and
maximum heart rate values
or select zone changes. See
About Heart Rate Zones,
page 18
Heart Rate
and
Zone Calculations, page
19
.
You can set minimum and
maximum pace values.
You can set the high or low
power level.
You can set a radius from a
saved location.
You can set timed walking
breaks at regular intervals.
31