Garmin FENIX 6 PRO Series Kullanıcı El Kitabı - Sayfa 26

İzle Garmin FENIX 6 PRO Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Garmin FENIX 6 PRO Series 29 sayfaları. Turn on smart watch of 2022 - go wiki
Ayrıca Garmin FENIX 6 PRO Series için: SSS (5 sayfalar), Nasıl Yapılır (8 sayfalar)

Sayfayı Yazdır

For more information about pulse oximeter accuracy, go to

garmin

.com/ataccuracy.

The oxygen saturation percentage

A graph of your average oxygen saturation readings for the last 24

hours.

Your most recent oxygen saturation reading.

The elevation

scale.

A graph of your elevation readings for the last 24 hours.

Getting Pulse Oximeter Readings

You can manually begin a pulse oximeter reading by viewing the

pulse oximeter widget. The widget displays your most recent

blood oxygen saturation percentage, a graph of your hourly

average readings for the last 24 hours, and a graph of your

elevation for the last 24 hours.

NOTE: The first time you view the pulse oximeter widget, the

device must acquire satellite signals to determine your elevation.

You should go outside, and wait while the device locates

satellites.

While you are sitting or

inactive,

the pulse oximeter widget.

Press @to view widget details and begin a pulse oximeter

reading.

3 Remain motionless for up to 30 seconds.

NOTE: If you are too active for the watch to get a pulse

oximeter reading, a message appears instead of a

percentage. You can check again after

inactivity. For best

results,

heart

level

while the device reads your blood oxygen

saturation.

Press DOWN to view a graph of your pulse oximeter

readings for the last seven days.

Turning On All-Day Pulse Oximeter Readings

From the pulse oximeter widget, hold MENU.

Select Options> Pulse Ox Mode> All Day.

The device automatically analyzes your oxygen saturation

throughout the day, when you are not moving.

NOTE: Turning on all-day acclimation mode decreases

battery life.

Turning Off Automatic Pulse Oximeter

Readings

From the pulse oximeter widget, hold MENU.

Select Options > Pulse Ox Mode > Off.

The device turns off automatic pulse oximeter readings. The

device begins a pulse oximeter reading when you view the

pulse oximeter widget.

Turning On Pulse Oximeter Sleep Tracking

You can set your device to continuously measure your blood

oxygen saturation while you sleep.

NOTE: Unusual sleep positions can cause abnormally low

sleep-time SpO2 readings.

scale.

press UP or DOWN to view

several

minutes of

hold the arm wearing the device at

From the pulse oximeter widget, hold MENU.

Select Options > Pulse Ox Mode > During Sleep.

Tips for Erratic Pulse Oximeter Data

If the

pulse

oximeter data is erratic or does not appear, you can

try these tips.

• Remain motionless while the device reads your blood oxygen

saturation.

• Wear the device above your wrist bone. The device should

be snug but comfortable.

• Hold the arm wearing the device at heart level while the

device reads your blood oxygen

• Use a silicone band.

• Clean and dry your arm before putting on the device.

• Avoid wearing

sunscreen, lotion,

the device.

• Avoid scratching the optical sensor on the back of the device.

• Rinse the device with fresh water after each workout.

Training

Setting Up Your User Profile

You can update your gender, birth year,

rate

zone,

and power zone

settings.

information to calculate accurate training data.

1 Hold MENU.

Select User Profile.

Select an option.

Fitness Goals

Knowing your heart rate zones can help you measure and

improve your fitness by understanding and applying these

principles.

• Your heart rate is a good measure of exercise intensity.

• Training in certain heart rate zones can help you improve

cardiovascular capacity and strength.

If you know your maximum heart rate, you can use the table

(Heart Rate Zone Calculations, page

heart rate zone for your fitness

If you do not know your maximum heart

calculators available on the Internet. Some gyms and health

centers can provide a test that measures maximum heart rate.

The default maximum heart rate is 220 minus your age.

About Heart Rate Zones

Many athletes use heart rate zones to measure and increase

their cardiovascular strength and improve their

heart rate zone is a set range of heartbeats per

commonly accepted heart rate zones are numbered from

according to increasing intensity. Generally, heart rate zones are

calculated based on percentages of your maximum heart rate.

Setting Your Heart Rate Zones

The device uses your user profile information from the

setup to determine your default heart rate zones. You can set

separate heart rate zones for sport profiles, such as running,

cycling,

and swimming. For the most accurate calorie data

during your activity, set your maximum heart rate. You can also

set each heart rate zone and enter your resting heart rate

manually. You can manually adjust your zones on the device or

using your Garmin Connect account.

Hold MENU.

Select User Profile> Heart Rate.

Select Max. HR, and enter your maximum heart rate.

saturation.

and insect repellent under

height, weight,

heart

The device uses this

21)

to determine the best

objectives.

rate,

use one of the

level

of fitness. A

minute.

The five

to 5

initial

Training